Wire Connectors - Low Voltage T Tap Wire Connectors, 3 Way Wire Connector, T Type 2 Pin Solderless No Wire Stripping Required for LED Strip, Automotive Connection Fits 24-20 AWG 12 Pack

handy kit but to small for what i needed

Totally rubbish. No connection on cable. Wasted time trying to use it!!

Excellent for parallel connection of low current circuits. Need to make sure too much force is not used or it can break.

Dont use... barely work but also destroy the wire. After they failed to make good connections once removed over half the strands were broken. Am happy they failed now as has revealed the damage they have done. Will be soldering or using screw terminals in future

The whole idea seems sound BUT I have tried a range of cable sizes that are within the Spec. I have tried cables with the outer sheath intact and others with the cables stripped. The results are always a complete failure in terms of forming a firm joint and providing electrical continuity across the T. Save your money..

Connected wires to low voltage lights. Did not work. Used a connector block and worked first time. Tried it on another light same issue put them in the bin in the end

Super et se pose bien

Well made

Fácil de usar

These small T-tap wire splicers are an excellent solution for splicing in wire pairs (12 volts or less) where there is a small confined area to work with. I spliced into the Lane Change Assist/LKAS Module on my 2013 Honda Accord EX-L sedan. I tapped the 12volt circuit to install a 3 Ports 12V RV USB Outlet adapter as a 5volt power source for my dash cams. Simply place wires into tap wedges and close top section and crimp down closing cap with a pair of pliers. These T-tap splicers made the project quick, easy, and successful. I highly recommend these T-tap splice connectors for such 12v automotive projects.

Really durable and easy clip and go! Best wire splicing taps out there!