FultonTaper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop

Simple design, but surprisingly effective. I purchased to make some simple angled cuts and it worked perfectly. The only alternative I could see to this would be either an expensive one by one of the higher end brands or making one myself. And I don't know that anything I made in the shop would have been much better. My only complaint is the hardware can slip if you don't get it tight. I might try to either replace a screw or two. Or maybe figure up a block I can clamp in. Still, it is a good solution at an inexpensive price.

Use a sharp blade so your not force feeding the cut, which you shouldn’t be any way.

My rating is so high, not because this sled's complexity, but because of it's simplicity and the function it performs.As long as the material you're shaping doesn't exceed the length of the sled, this is the only type of device that will do the job.Very easy to adjust, although it takes 3 additional minutes to switch between left and right hand cuts. Easy to understand directions and uncomplicated design using materials that will stand prolonged home shop use.

The media could not be loaded. I wanted to like this thing, but its not made very well. I was trying to adjust the scale in the video and the screw stripped out. It was only my second adjustment ever made to it since I owed it. There is quite a lot of slop in it also. I would like to return it and find one that is made with attention to detail. It can work, but for how long and with what accuracy is questionable. I hope this helps someone trying to decide.

This has helped with my sawing wood.

Good jig value wise for what else is out there.

It works.

Nice little jig for relatively small size pieces of wood. Keeping it under 3 feet is safe to handle. I run it dry (blade down machine off) for a test run making sure I'm on target. Cut slow. Works well.