Hobbypark102010 102011 102012 122057 Aluminum Steering Knuckle Hub Carrier Servo Saver Ackerman Plate Upgrade Parts for Redcat Volcano EPX

Great product

Don't fit well poor desing

Fit great

Good strong parts but bearings fit loosely in wheel hub and had to grind casters and blocks to remove interference limiting suspension travel also hinge pins fit loosely leaving suspension feeling slightly sloppy/shaky

The good:It all fits and works, just use a tiny bit of lock-tight on (Any) screw from the BOTTOM. The one part I didn't use was the part that tied the two steering carriers together, the 2 bolt you need that tighten from the bottom, simply fall out after you turn left/right. Use the stock plastic part and all is happy, not one issue yet.

They make the car look way more amazing but the only thing I disliked was the long blue part shown in the picture as it was very loose and messed up the steering but all I did was use the original piece and worked perfectly .the other things were easy to install and loved the extra clips/just be careful with the screws they can be very weak

this is mostly ok. The parts seem a bit loose in areas. Precision doesn't seem to have been high when machining these pieces. The Ackerman arm was too thick and had to be filed down on the ends in order to work. I attempted to tighten the screws and they would tighten against the arm instead of the bushing. So when it moved it would either bind or loosen the screw. Removing material from the ends so the screw head made contact with the bushing instead solved the problem.

Very nice looking! And sturdy, had to use shorter screws for the front c hub knuckles so that the wheels can spin freely and had to use one washer for one of the front c hub knuckle so that it won’t be wobbly and be really careful to not over tighten the little lock screws that lock the rear arm pins in place.

I had no issues with fitment, and very strong parts. Not sure why some of these other reviews say otherwise. Glad I bought this.

As per descriptions