CURT13115 Class 3 Trailer Hitch, 2-Inch Receiver, Compatible with Select Kia Sedona , black

This model of the Kia Sedona is already equipped with threaded mounting and wiring for tow packages. I don't know how it could be any easier to install. Shout out to the KIA manufacturing/engineering for that and shame on the KIA service shops for charging so much to install tow packages.The kit itself is heavy grade with clean welds and coating by a reputable company. Its rated higher than the OEM and I personally feel like it is better quality and looks better too. Don't forget to buy the wiring kit that plugs right into the vehicles existing wiring harness and mounting bracket to hold the connector.I installed mine in under 2 hours with nothing but a screw driver, a socket wrench, and a box knife to cut the driver side plastic under panel section to accommodate the kit. If you know how to use those 3 tools, do not be afraid to DIY this kit and save yourself hundreds $$$. There are several great videos on youtube for installation.

I bought this Curt trailer hitch to attach to my 2020 Kia Sedona for hauling bicycles and extra luggage. This was my first time installing a hitch of any kind, and the straightforward directions included in the packaging helped make the install an easy process. The most difficult part was lowering the exhaust without exhaust pliers. If I could do it again, I’d buy a pair to help speed things along. Also, make sure that you have a decent torque wrench to tighten it to the exact specifications. Overall this Curt hitch is definitely sturdy, and I’d feel comfortable hauling up to the maximum allowable load.

This fit our 2015 Sedona EX perfectly. We've used it for pulling our bike/cargo rack. We've carried bikes and luggage for long trips. This hitch DOES come with the necessary bolts, washers and instructions for the proper installation. We did take it to a mechanic because it was quicker and they had the tools to make sure the bolts were torqued to correct specifications. Me, I would've turned it until my hands were red just to be sure but I'm no machine. I wanted to be absolutely sure it was nice and snug. It uses 6 bolts and you have to remove some pluglike pins from underneath to reveal the location where you have to mount it with the bolts. Its beautiful and great. For doing what we do with it, we would definitely recommend it.

Great hitch. Curt never fails. Fitment, quality, ease of install all perfect. One thing, don't remove all the hangers. Just remove the one holding the axle back and unbolt the axle back. Lot easier. And you can still use the trim piece just need to be cut.

WOW WOW WOW!!I can not say enough good things about this product. It was delivered in less than 24 hours from the time of order, installation was among the easiest things I've ever done. Literally 6 bolts start to finish. And the step by step instructions that arrived with the hitch covered every part of the process.Then there's quality. Strong, well built and durable. It's very apparent that this hitch will still be in its prime when the vehicle is a weathered rust heap.Price? More than fair and far less expensive than this same product is sold for elsewhere.If I could ten-star this experience I would. I truly hope I have the need and opportunity to buy from Curt again soon.

The unit comes in a generic box with an expanding foam in a bag to stabilize the content. Needless to say, the box came with distress from handling. Worse yet, the unit has several deep scratches and gouges. The first one went back; second was only slightly better. I decided to just live with the scratches. This is odd since, in the past, I've ordered and got a perfect unit for my Kia Sorento. Curt's quality is going down.Nonetheless, I followed the tips provided by several reviewers and reused the cover. Rather than removing a whole section like some of the reviewers did, I cut a 1/2" width and 9 1/4" length of material from the middle of the cover. Note, the cut is 1/4" along the middle ridge line from the rear edge of the cover. See photo, which shows the inside of the cover.After installing the cover, I notice that I could have cut the length of the unit by 1/2" less or 8 3/4". The extra 1/2" gap, however, might be useful at expelling anything that might get caught inside the cover. See photo of the installed cover.The hitch does hang a lot lower than I expected. I've installed the Curt 18153 60"x24" hitch cargo and have not scraped the ground. The Curt 18153 has a curved hitch beam; thus, I get a little more ground clearance. See photo of the Curt 18153 hitch cargo installed on my 2015 Kia Sedona.

Very satisfied with this product! Fit great on my Kia Sedona 2016!

Good product

Easy install, need 2 people or jack stands but simple to install, I cut my the plastic around for the driver side instead of removing the cover all together. Muffler doesn’t have to be removed just the one bracket off to swing it over but it does take some effort

Exact fit for 2016 Kia Sedona couldn't be much easier to install

The product is awesome. Packaging was rough when it arrived from UPS, however product was well packaged inside. I would suggest taking a look under your vehicle first to see if your weld nuts are rusty or not... if they are you may need to re tap the holes. I had to do this. Used an M12 1.25” tap to clean up the threads. Take your time and use some cutting oil. Once the homes were cleared it was a 30 minute install with an extra set of hands. Make sure you have a. Can of lubricant like Wd40 on hand. I was able to put my plastic shield under the driver side back on after by cutting a 1/2” by 8 3/4” split in the plastic to make way for the hitch.This arrived within two days of ordering.