Perfect Pattern Light & Brightness A carefully calibrated and shaped silicone lens combined with a TX1860 Chip LED to provide clear and 360°angel beam pattern.Crystal clear 6000K white light @ 7,600Lm (3,800Lms per bulb) Professional automotive LED lighting No dark spots,no short beams,no scattered beams,safer night driving! True 6000K Cool White Light & Fast Start Crystal clear daytime white lighting,plus "Instant-On"capability with zero warm-up time . Comprehensive Heat ControlMOSTPLUS LEDs are made to last pretty much forever (50,000 hours).We adopted a wide heat control system (powerful 7,000 RPM TurboCool fan cools with twice as much force as a generic LED) to keep the light cool. Performance and Heat Control Driver The driver including ASIC specifically designed to connect to LED bulb,which optimizes the heat protection,brightness output,and power efficiency,ensuring the clearest light pattern. Plug and Play Installation. Direct replacement for factory halogen bulbs. Waterproof Watertight sealed with rust-proof aluminum and ensure consistent performance and durability Warranty All MOSTPLUS LED headlight come with 3-year warranty Specification >Model:D2S>Voltage:8V-32V >Power : 60w/Set & 30w/ bulb >Actual Lumen : Up to 7600 lms/Set & 3800 Lms/ bulb >LED Type : TX1860 Chip >Color Temp: 6000K Cool White >Waterproof rate : IP67 >Shell Material : Cold-pressed aluminum heatsink >Beam Angle : 360' >Working Temp : -40'C - +80'C >Connector Type :Plug and Play >Brighter than your stock Halogen headlights >Life Span:Up to 50,000 Hours
A**R
Sent item back as one bulb wasn't working and no refund..it's been 3 weeks
Arrived late just zo find out that one of the units wasn't working..sent back for refund and no refund 3 weeks later..avoid
J**9
2011 Infiniti G37x mod. required, but simple enough & bright
Came with everything needed to make make this bulb work in my 2011 Infiniti G37X sedan. It did require I cut the factory connection to the ballast, and drill a hole into the headlight dust cover. This bulb kit came with the connection needed to splice into the oem headlight circuit (butt connectors not included), which made it able to plug the LED bulb. I checked my polarity for my headlight before proceeding, in my case, the blue wire is positive, and black was negative. This product is a bargain, as my ballast had gone bad on the driver side. The price of this kit is almost as much as 1 ballast for this car ( average price on Amazon and eBay $40). Overall I am very satisfied, did require some fabrication, but very minor. The light is just as bright as the oem HID D2S, and this $40 kit replaced $300 worth of ballast and HID bulbs ($100.00 for 1 HID D2S sylvania bulb). Bargain, no doubt!
C**7
Bright, good fit, compact
Installed these in place of D2R HID bulbs in an Acura TL. Wired these directly to the power supply to the HID ballast and they work perfectly. They put out more light than the halogen high beams do, in an even wide pattern as well. They’re a cool white color, not an obnoxious blue like the oem HIDs. Can’t speak for the longevity, but will update if one goes out. Since they’re so cheap, might as well buy two sets and keep extras since after doing the wiring, replacing is just plug and play like a normal bulb. UPDATE: 10 months later I’ve put these exact bulbs in two originally HID vehicles and they are both just as bright as when I put them in. No flickering or any nonsense.
P**1
Not an ALL-in-ONE CONVERSION KIT
Not an ALL-in-ONE CONVERSION KIT as listed.No other plugs or adapter included, Only bulbs included in listing. No Response to fix issue especially when product doesn’t include instructions to D2R bulbs that was sold and delivered to me as an “ALL-IN-ONE CONVERSION KIT”Bought this ALL-in-ONE LED CONVERSION KIT to replace my Nissan factory HID. Item received came with end connector plugs similar to 9005/9006.The connector from my factory bulbs are different from what was sent. Therefore it’s not an COMPLETE CONVERSION KIT as STATED and LISTED.No response to fix issue.What else needed to complete my HID to LED conversion?
T**E
Be aware, these might not be what you need
I bought these bulbs for my 2009 Mitsubishi Lancer GTS, and while the bulbs are D2R, the actual connector to the headlight is different.The first pic shows these bulbs, As you can see there is an orange bar where the connector should be. Although you can't see it in the pic, there is a small wire that comes from the side and has the actual connector...but this didn't work with my car.The second pic shows the actual connector needed...just note that the D2R-D2S designation is for notches in the ring around the middle of the body. This is how the bulb is held in place. See third picture with notches highlighted.I can't say these are good or bad as they simply did not work with my car. I will say they seem to be well made and have a sold feel to them. With the LED bulb, having aluminum fins to dissipate heat is a welcome feature. I am only knocking a star off because there is no documentation in the Amazon page that shows what actual connector you will need or should have in order for these two work.
Trustpilot
2 weeks ago
1 day ago