Duratrax Pit Tech Deluxe Car Stand Black DTXC2369

I've got a Traxxas Slash 4x4 and when on this stand, the tires are at least 1" off the table-top. I'd have to go to tires 2" bigger to make it hit. And I'm getting ready to do the Low CG conversion so that should give me even more clearance. This stand works great for repair work. The only thing that could be better would be if there was a braking mechanism that would liimit its ability to rotate so easily. It's a standard problem, sometimes you want it to rotate and sometimes you don't. But for the price, this thing is pretty much perfect. Also use it for my RC10 B4.2. Perfect for it as well. The other genius feature is that it breaks down easily for hauling around in the tool box. Great tool and great price.

Very happy with this stand for my Traxxas Slash 4x4. Some people say it doesn’t sit high enough and the tires are still on the ground. I do not have that problem with mine. Tires are a couple inches from touching. So works perfect. The blue color is nice over the black. It makes it easy to see black screws in the tray. And because my Traxxas Slayer also fits on this stand just fine, I ordered another one :)

Good - As expected, when I place my RC onto the stand it prevents the gravitational pull of the earth's effect and suspends it in the air where it is easier to work on the vehicle. I like the holes for shock maintenance and the tray-to-place parts. The price is not bad. Convenient - For those who plan to travel with this to a track it is very convent and folds flat for easy placement into a toolbox. Ugly - The plastic is susceptible to harsh chemicals like brake cleaners. It will melt the plastic. So, if you use chemicals to clean your tires etc. This might be a problem. It might (i don't know) do the same with nitro. If you are not using harsh chemicals....no issue

This pit stand works great in my hobby room. I didn't think that it would really make much of a difference in the way that I work on my trucks, but it really does. It allows me to move the vehicle about more freely without having to worry about holding onto it. Doing basic maintenance is a snap now, as all I have to do is flip the vehicle around on it's stand without having to worry about picking it up at all. My SCT and other trucks fit on it with their wheels and tires on with no issues. I've noticed a few people mentioning that they have trucks that drag along the table when they leave the wheels on, but I haven't had this issue. It works fine with my Torment SCT, Stampede, and my on road car. I did find that with my Summit the wheels and tires would drag, but that's a huge truck so I feel that was to be expected. I simply removed the wheels when using the stand with the Summit, and didn't have any issues. In fact, I feel that removing the wheels while using the stand would be a preferred method, as it makes it just that much easier. I'm really glad I bought the stand, as it's made maintenance on my trucks that much easier. It also breaks down to a fairly flat set of parts for easy transport inside a pit box or bag. I also like the parts tray on the front of it...no more losing screws on the floor that were just rolling around on the table!!! Highly recommended.

This is great for any rc car. I ordered it simply so my car wasn’t sitting on it’s tires/suspension but it actually makes it a lot easier to work on it as well. I was iffy because it was one of the most affordable ones (people automatically assume that means it is a cheaper quality) but no, it is just as durable and as nice as the expensive ones. I will be purchasing again for my other hobby cars!

Great stand and does its job; however, I purchased it for a slash 2wd vxl and it is too low to the ground to accomplish the purpose it is designed for. Ok, didn't realize they make a larger version for trucks so I bought that one. I figured I could use this one for my 1/16 e revo; however, the pad is too big for the 1/16 e revo...so I guess it is just extra until I get another vehicle that will fit it. It's a good product and a must have for cars. Just make sure your car will fit it. I was also told if you upgrade to RPM A Arms that you should store it on a stand so the nylon arms don't bend. Hope this helps.

Duratrax you made a great one. It fits my 1/10 HPI Blitz as well as my 1/12 HPI Savage XS. It relieves the suspension so it can sag to full length and also spins smoothly. Added bonus, I can turn the truck on and spin the wheels without hitting the stand. Good for testing simple things like if the wheels spin freely or if the motor is hooked up correctly. It's durable, collapses for traveling and has a useful tray for holding small parts. What more could you want?

This is a great little car stand. I agree that it would be nice if the top would clip onto the bottom when broken down, but it doesn't bother me enough to remove a star. The little parts tray is nice to put pieces as they come off of the truck too. My Traxxas Stampede doesn't quite fit as the wheelbase isn't long enough and it sits on the supports. A small block of wood fixed that issue. My Nitro Rustler fits great, just make sure the center of mass is actually on the platform.

Good item

バラしてコンパクトに出来るので遠征に行くのにとても、重宝します。

Gebruikt om mijn Lego MOC's op te bouwen. Werkt prima voor middelgrote bouwwerken.

It’s plastic, not metal like it may appear in the images but none the less it’s a good value product.

Works well for my Axial SCX10. It would be nice to be able to raise it up a bit higher though. The tray works great to store body clips and screws, etc.