PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1oz Applicator Syringe, Off White 10112

Very effective product. Keep in mind though, that the epoxy mixture is not thick and it takes awhile to cure, making it hard to keep the pieces been glued together.

perfect for vertical applications, nice and thick.

I used the Epoxy Adhesive Paste to repair a crack in my countertop, and it worked perfectly. The application was easy, and it set quickly, making it ideal for my DIY project. The only downside was that I needed to mix it beforehand instead of using it pre-mixed. I highly recommend this product!

Arrived quickly, used to fill eroded areas on windowsill aluminum flashing. Work great re-ordered more.

I've used this to fix several pieces of ceramics that got broken in a move that I didn't want to get rid of. It's a little difficult to work with, and one side wants to come out faster than the other, but once mixed, it's definitely a great epoxy for fixing porous materials like clay pottery that are difficult to mend otherwise, and they still remain washable. That's exactly what I got it for, so it's working as designed. I found that mixing it on an old piece of cardboard and using a plastic knife from a to-go cutlery set did the job quite nicely. It'll stick to anything, and glue it together, but good, so you can't get it on anything other than what you want to fix and something you can toss. But after I fixed the items I bought it to fix, I went 'round the house looking for other things I might fix, so I definitely found it useful. You do have to be careful not to put too much on the item your fixing because it will squeeze out between the pieces, if you're not careful. Just take your time and use little dabs and you'll be quite pleased.

I just didn't like the color i was getting! just not that white.

After much searching and reading I finally decided on this to repair an alabaster lamp. I know it’s not the ‘correct’ adhesive but I made it work. First super glued but I needed something to fill in some cracks. I chose this because it’s sandable and paintable. I also was happy the color stated it was off-white but it’s not. Someone who’s maybe not really picky about color might say that but it’s a pale green gray. I was disappointed but again, it’s paintable so not the end of the world. It was easy to use and the adhesion seems strong. I tried to sand with sandpaper and it was too large of the area and scratched the alabaster. I need to pick up a dremel tool before I can complete the project. What I did catch with sandpaper smoothed our nicely. Went to company’s site for how to. Will update when project is complete. Photo shown after mixing while still wet. Dried slightly lighter.

Needed a small amount to fill screw holes that hold down the screw-in snaps on my fiberglass boat that had become to large for the screw portion of the snap. Hardened and worked perfectly holding the male portion of the snap in place. Highly recommended.

Cumple con lo que indican, me sirvió. Buen producto.

Very easy to mix in the right proportion

Easy to use and quite easy to smooth etc. sets solid pretty quick too.

It is normal for a long setup and cure. Once cured this product is very strong and waterproof. Will stick to metal and fiberglass but not recommended for HDPE. I used it on freshly cleaned HDMW to aluminum with good results so far even though the HDMW is related to HDPE. I would say this stuff works beyond its recommended application as I am following the footsteps of another who used it to attach a HDMW tapping block to an aluminum hull for a fish finder.

Good