Straplok® Dual Design Strap Button Set - Gold

I have been using Jim Dunlop brand strap locks for decades and they work very well. I would definitely recommend over most other brands out there.

These strap studs are well made and have a nice finish. I replaced the pointed ones that came on my new Gibson Les Paul 70’s Custom with these. The guitar has gold hardware and it matches perfectly.

Dunlop always makes a good product in my experience. These were perfect , installed nicely, and look great with the gold hardware on my SG. I’ve always like Dunlop strings , straps, and polish products. I use others , but Dunlop is a trusty brand !

I have these on all my guitar and have had for many years. Makes storing your guitar easier

You can’t go wrong with this company.

The function of the product is good. This item is very easy to install. The item holds on the strap very secure. The value of the product is worth the money.

Great guitar strap locks. I have these on all my guitars. I have the gold, nickel and black ones to match the hardware of each of my guitars. Makes it quick and easy to switch from each of my guitars and keep using the same strap. Only other locks I would recommend over these would be Schaller that I've used in the past.

I've always seen these as the best design in strap locks and have used them exclusively for decades.

Excellent strap buttons, they even worked well with my existing black screws look good.

Product was really amazing 🤩

Esthétique et solide. du bon matos pour ma gratte !!!

🎸 I bought these as I had used them before and was satisfied with both the construction and the finish. Some cheaper alternatives are noticeably smaller, and from the images, it is clear they would press into the instrument’s surface when fitted, even with the felt protection. That is not the case with these. They cost twice as much, but the secure fit and the fact that they will not damage the instrument make them a far better option. The only drawback is the screw supplied with the gold version—considering the finish, a brass screw would have been more suitable, or at least one with a matching gold finish. It’s a very small point as you cant see the screw very well once installed. 🎸 I found the strap button slightly larger than many of the smaller versions available, which makes the strap sit more securely and reduces the chance of it coming loose. Fitting was straightforward, though it requires care, as there are no instructions included. The biggest concern is preventing damage to the finish. Before installation, I checked inside the instrument to confirm that the tail block was thick enough for the screw and correctly positioned. Mine was offset by about 5mm, though not enough to cause a problem. 🎸 To install, I marked the desired position and placed a piece of protective tape over it—avoiding clear tape, which can be difficult to remove cleanly and is not robust enough. I drilled a 1mm pilot hole to match the screw’s depth, measured with the button, screw, and felt assembled. This was then widened to 2mm, then 3mm. To prevent the screw from damaging the finish or the centre seam, I drilled the outer layer to 3.2mm to a depth of 2mm. The screw went in smoothly and held securely. The opening in the button is wide enough to accommodate a standard screwdriver head without issue. As mentioned, I have purchased these before and will again. ✔️

Very good quality buttons for a fair price.