Mini Projector Mount Bracket Universal, Wall/Ceiling Holder for Mini Projectors - Multifunctional Mounting System(215 * 88mm)

Used for our projector installed in our ceiling. Very light but sturdy. Easily can be installed. Straight forward. Very neat and tidy to see. Universally fit

I installed this in the bedroom to hold a projector that I bought a couple of years ago and it works just fine. Simple to install, easy to adjust the position and I can't grumble for the price.

Good enough build

We recently bought a projector to enable us to watch TV in our campervan. We needed a means of mounting the projector that wouldn't encroach on the limited space within the van: this mount is ideal - we have screwed it into the base of the pop-top; once mounted, the projector is above our heads and doesn't get in the way; when we have finished with the projector, we can unscrew it from the mount, which can then be unscrewed from the fixing plate.

Very good for small projectors

Just what I wanted, neat, tidy and light weight. All the aluminium parts are smooth, no rough edges. The arm just screws into the wall plate, once you have mounted it. Only one criticism, the rawl plugs and screws were to light weight and initially started to pull from the plaster. I have replaced these with a size 8 and all is good :) Getting the orientation for projection was a little fiddly because the base plate is sitting on a ball and socket but once achieved and thumb screw tightened nothing has moved. Great because with my small projector I didn't want to use a great big bracket.

It looks pretty, the mount to the wall is ok, but the ball mount to the projector is woefully inadequate. The design is ok, but the material is too thin resulting in the projector wobbling even when tight. The ball and socket that allows a wall or ceiling mount is the problem area. My cheap projector is light, 200x200mm ish in size and is wall mounted. Once the projector aligned and the joint is tightened there is more than 1 inch movement up and down when gently moving the projector, once let go it returns to the original position. It flexes when pushing the membrane on/ off switch! I have a small piece of wood that is between the mount arm and the projector base that firms it up. It works, barely, just don’t on any circumstance buy this mount for anything you you’d be upset with, if it came crashing to the floor. The issue for me is there are cheap mounts like this or mounts that cost the same as my projector and I’m not paying that. I see a small shelf coming in the projectors future

FIGFYOU Mini Projector Mounting Bracket (wall or ceiling).Good Price and easy to fit,but found Wall mounting it you need to make sure that you first screw tighten the Tube into the socket and to screw (clockwise to tighten) the End ball fitting tight onto the Tube End.Then this is a Bargain Price that functions very well.Its very light and you may want it in a different colour (if you leave in place)? Good solid adjustment knobs.Recommend.

Perfect

Fantastic proj holder! For the price it's unbeateble. (up to, around ~3kg proj) Sturdy holder, good thread grip for the tube, easy use! Any negaive comments. I would say, that's people with 10 thumbs....

Rien à dire, conforme à la description

Die Beamerhalterung überzeugt durch ihre stabile Bauweise aus Aluminium und die einfache Montage. Sie lässt sich problemlos an Wand oder Decke anbringen und hält den Projektor sicher in Position. Die Ausrichtung funktioniert zuverlässig und die Halterung bleibt auch nach mehrmaligem Verstellen stabil. Besonders positiv ist, dass ich die Halterung gleich zweimal gekauft habe, weil sie mich so überzeugt hat. Für beide Einsätze funktioniert sie tadellos und macht einen sehr robusten Eindruck. Trotz des günstigen Preises wirkt sie hochwertig verarbeitet und sorgt für ein sicheres Gefühl, wenn der Beamer daran befestigt ist. Für Heimkino oder Präsentationen ist sie eine perfekte Lösung, die zuverlässig und unauffällig ihren Zweck erfüllt.

Buen soporte.