3D Touch Sensor for 3D Printer, 3D Touch Accessory Automatic Levelling Sensori V3.2 for DIY 3D Printer

Works great with my Ender 3V2. However you need to remember to change your firmware, remove your Z-Stop switch and change your GCODE in your slicer. It’s easy to install, fits many printers and greatly improved my print quality. I had a few issues with it not working however once I changed to the Professional firmware it worked great.

I bought this to try and get somewhere with my second-hand Geeetech A20T. I couldn't level the bed well enough to get prints sticking, so couldn't tune the printer or anything (I think it's to do with how the previous owner stuck the Super Plate down). This 3D Touch came with everything I needed to fit it (other than an allen key, but I've got those!). The cable connects directly to the PCB on the hotend too, which is handy - I didn't need to use the extension leads it came with. The cable routes "behind" the mounting bracket on the side of the hotend (I didn't spot that at first, so had to undo and re-route), then through the cover at the back of the hotend, and just connects up. That PCB wasn't labelled, so I had to figure out which was ground on that PCB and then connecting the cables was easy. I'd manually compiled Marlin and flashed, set my XY probe offset, did the Z-offset wizard and away I went! Straight in to a multi-colour print. The print quality was a bit poor (because I haven't tuned it yet) but the first layer went down excellently after a small z-offset adjustment - so much so I struggled to get the print off the bed. I managed to ram the scraper down my finger nail, so that's a bit sore. Not blaming the probe for that though... I'm now running some calibration/tuning prints - already printing better after tweaking my e-steps, but I'm so glad I'm actually able to get things to stick to the bed now. I can feel the z-stepper motor moving as the nozzle moves around the bed, so it's definitely doing it's thing. Has made a hell of a difference. Am now tempted to buy a second one for my other printer (Sidewinder X1) which gives me a different type of levelling headache.

I have used previous versions on some of my other printers and they have been fine. But this new version with the plastic pin has worked with greater accuracy. It comes with the fitting bracket bolts and an extension cable. If fitting on a Geeetech printer they have the connection at the hot end so you don’t have to use the extension so it makes a tidy installation. I knocked a star of as the instructions could be better, with links to the updated firmware if needed. But overall a good alternative to the more expensive levelling options.

I've been using 3D printers for over five years so am familiar with upgrades such as this and their wiring, firmware and settings needed to get them working. Although this device is new to me I was confident I could install it and get it working without issue. This item defeated me. It triggered printer restart cycles on probe deployment, requiring the standard TIOABOA to successfully restart the printer. Often it might work for a few minutes then the issue would emerge again. I verified all the wiring using a meter to ensure it wasn't a bad connection and on the occasion were it played ball or a few minutes I even got it to home or get partway through M48, showing that I hadn't connected it incorrectly. This lead me to the conclusion that the sensor was faulty. I suppose it's my own fault for buying a cheap and nasty clone instead of going for the genuine BL Touch or Creality's sibling. For me a lesson learned and I cannot recommend this product.

Bought this to replace my Bl after the probe broke on my ender5 pro. No real issues with getting this working it was nearly plug and play. The instruction in the box are not great but there is a good video on Geeetech web site showing the set-up step by step My firmware was already set up for the BL so no need to flash or update it. Mounting on the ender5 is easy the cover only allows it to be mounted in one place . Had it running just over a week and not had any failed prints due to levelling so looks to be working very well. I do like the Geeetech stuff its god value and works well with no fuss

Great works well, needs a bracket printed to fit a ender3 v2

The sensor helps with the continual need to have a level print bed. With automatic level calibration it makes getting a good quality print that bit easier. The sensor arrived well packaged, containing an array of fittings and cables to attach it to our printer. As it happens out A10 already came with a sensor bracket fitted, so we didn't need the supplied one. Fitting was easy, although the instructions were minimal. We guessed which way round the connections needed to be, and we were correct. For the A10 and the default Marlin 1.1.8 firmware you need to install an updated firmware to take advantage of the sensor. This updated firmware can be either downloaded and installed via Cura over USB. Or what we did was to download the source code, set the options to enable the sensor, then upload the new firmware via our laptop and the USB connection. This process could be a little daunting for those who are not used to such things, however it wasn't that bad, and there is lots of support online.

Great addition to the A10M I’ve installed it on, works perfectly, has a great tolerance (+-0.005) and is half the price of competitors! What’s not to love about that?! Easy enough to install following Geeetechs instructions…however, I wanted Marlin 2.0 which has more features for the probe and I would recommend anyone else to do the same. This is where a little bit of knowledge of firmware editing helps get this thing set up to its full potential. I no longer have to worry about bed leveling as UBL in marlin 2.0 does it all and works perfectly with this probe.

Si estás cansado de luchar contra la nivelación manual de tu cama de impresión, este sensor DERUC 3D Touch V3.2 es una mejora indispensable. La inversión de tiempo en la instalación se recompensa con creces en cada impresión. ✅ Lo Mejor del Sensor: Compatibilidad Universal: Funciona perfectamente con cualquier tipo de cama que uses (vidrio, PEI, metal), ya que utiliza una sonda de contacto y no se basa en la conductividad (como los sensores inductivos). Fiabilidad V3.2: Esta versión V3.2 es muy estable. Realiza la auto-prueba al encenderse (sonda sube y baja dos veces) y no he tenido falsas alarmas ni fallos en las mediciones. Componentes Completos: Viene con cables de longitud suficiente (incluyendo extensiones) y los accesorios de montaje básicos, lo que facilita la instalación. Conclusión: El esfuerzo de la instalación vale 100% la pena. Si buscas estabilidad, reducir el margen de error y aumentar drásticamente la tasa de éxito de tus impresiones, especialmente en proyectos grandes, no dudes en comprar el DERUC 3D Touch V3.2. ¡Mi impresora ahora es una máquina mucho más fiable!

Le DERUC 3D Touch V3.2 est une excellente solution pour simplifier le nivellement du lit sur les imprimantes 3D. Compatible avec une large gamme de modèles comme les séries Ender et CR10, il est livré avec 4 supports pour une installation facile. Le nivellement automatique améliore considérablement la précision des impressions, réduisant les erreurs et économisant du temps. Facile à installer et fiable, c'est un ajout essentiel pour les passionnés d'impression 3D. Très satisfait ! 🖨️✨🔧

Ottimo prodotto , montato sulla mia cr10 , funziona bene ed è facile da installare , 10 minuti e avete fatto , consiglio di infilare il cavo nella guaina dell’estrusore

Es perfecto para sustituir el de una Ender 3 SE. Solamente hay que quitar el viejo y colocar el nuevo en el mismo soporte y con el mismo cable. Solamente hay que alargar un poquito los agujeros del soporte para poder dejar el touch a 3 mm de la cama. Encender y a funcionar. Sin problema alguno y más exacto que el original.

Il DERUC 3D Touch Sensore di Livellamento è un accessorio essenziale per chi vuole migliorare la qualità di stampa 3D. La versione V3.2 è precisa e facile da installare, compatibile con molte stampanti. Il livellamento automatico della piattaforma è affidabile e consente stampe sempre perfette, risparmiando tempo e fatica. La qualità costruttiva è eccellente e il supporto è chiaro e utile. Consigliatissimo sia per principianti che per esperti!