Front Load Washer Tub Bearings and Seal Kit Parts Replacement Compatible with LG & Kenmore Etc-Brown

Simple install, took about 3-4 hours disassembled almost the entire washer. One tool I would recommend if you do this is a bearing puller. The old bearings were frozen in place, I soaked them with WD-40 for 30+ minutes and still pounded them out with a 2lb sledge. new bearing went in easier. The tub shaft was a very tight fit and would have been easier with a puller.Overall way better than shelling out $700+ for a new washer.

This is a great value and good quality parts. Saved a lot of money versus buying individual parts. Washer runs like new. I would definitely recommend this kit!

The bearings were probably manufactured in the same Asian factory as the rest of them that are available. However, this company doesn't stand behind their marketed version of them very well.I changed the bearings to these bearings 6 months ago. They worked great for a while. But the same noise issue is returning. No warranty. No deal on a new set. Just a response that "The humming sound cannot be determined if it is due to the bearing. It may be caused by other reasons."I'd suggest buying from another company.

The bearings fit fine, but the tub gasket was at least 1" too long. We had to cut it and superglue it back together, making sure the cut was at the top of the tub. Hopefully it won't leak.

We have a 2008 LG washer and it started making a lot of noise. Figured it was either bearings or the spider so I replaced both. Not saying it was an easy job (this is not something I do frequently), but got the job done and washer has been running well for at least several months now.

I installed this set about a year ago with a buddy. About 9 months in they began to make noise, and now a year in they are noisier than the machine shop I work in. I also recall having trouble getting the included gasket to fit properly between the drum halves (so I just reused the existing gasket).Now, I could have just gotten a bad part , so I'm giving these another shot. When I contacted regarding warranty, they asked me for a picture (I don't know about you, but I don't know what a picture would resolve here, nor how I would take a picture without ripping the whole thing apart) - so for twenty bucks I just ordered another set. Maybe I'll follow up for a refund after I replace this next set.I'll try to remember to follow this review up after some time to indicate whether my second set performs better / same / worse, and adjust my rating to suit.

Was what was expected. Quiet the washed down like it was new again.

The bearings were out in my fro t load of washer. Bought these bearings as replacement bearings. A little time consuming because you have to take the whole thing apart but the parts worked great & washer works as good as new now. Very happy with product.