Touri 2 Pcs Arch Window Light Filtering Pleated Shade Blinds, 72 X 36 in

Easy to install, provides 50% light blockage, well made, trim to fit

We had lost a lot of our shade trees recently due to Hurricane Ida. We now have the sun beaming into our south and west facing windows in the afternoon to a point where the AC is having a hard time keeping up with the additional heat load. I did some internet research looking for possible solutions as our windows are too high up to reach to open and close shades. While I was going to purchase battery operated blinds, there is not enough room on each side of our arched windows to span a blind. I figured these were priced right to give them a try. My wife was totally against these as she feels they are old fashioned and look like something you would see on the Golden Girls. I ordered them anyway. The installation was simple and straight forward. Be sure to clean the dust off the window frame before installing as the double sticky tape that comes with them will need to bond to the lower part of the window frame. I also had to put a small piece of the tape at the top to secure the shade from falling outward. As soon as I installed the shade, you could feel the difference in temperature. I do not think it looks bad in the window, but the wife hates it. However, she has not complained about being hot since I installed it. I went outside to see how it looks and was almost blinded by the reflection of light coming off this shade. It is actually silver on the side that faces the window and white on the side that faces inside. It does the job well. It comes with two shades which is great as there is a high chance you will damage the shade when installing as they are made of a paper like material which is very easy to bend and distort. Mine has a couple of bent seems, but not so bad to require me to take it down. Good luck. Highly recommend.

The product worked well and solved my problem. I’m giving it 4 stars because they only put 3M adhesive on one side. I had to add my own double-sided tape to the opposite side to secure it properly. Obviously, not every window arch is a perfect semicircle, so in my case there is a little extra material near the edges while it falls slightly short at the very top. That’s understandable and not really a fault of the product. Also the middle little curve create a very small gap. I’m also not sure why the package comes with two shades. I would have preferred the option to buy just one. Now I have to store the second one, and I may never use it. The material is very simple, and I would guess the actual manufacturing cost is probably only a few dollars compared with the roughly $13 price per shade. Of course, shipping, returns, packaging, etc. have to be factored into the retail price, so I think the price is still reasonable. Overall, it solved my problem, it was inexpensive, and it’s a simple product that does what I needed it to do. I don’t know how long it will last, but if I get a year out of it, I’ll be happy — that’s basically $1 per month.

We just put it up today so I can’t speak to the longevity, but so far we love it! I got it for my baby’s room to help make it darker so she can sleep better. IF your window is a perfect half circle arch, it is SUPER easy to cut. If not, it can still be easy if you don’t mind it not fitting perfectly (lets a little more light in the edges if cut short), or you can try to trace and cut super slowly, or cut a little big and then trim. The good thing is that it comes in a pack of 2, so worst case you get a second try! I love that it is white on the inside, most arch shades that get the room dark are black which don’t look as good. And I LOVE that it is reflective on the outside - the room was noticeably cooler shortly after we put it up (and we already had blinds on our arch but they did not help with the heat). I can’t say for sure if they are 100% blackout because we opted to go the easy route with one simple cut, so the sides are just a hair short which lets a glimmer of light in, plus our window below isn’t blacked out. However before installing I shined my phone flashlight through and couldn’t see any light from that, so they are least block most of the light! We have blinds on top of the shade - we already owned the blinds but wanted it just a little darker and a lot cooler - but in the picture, the shade IS up, it is just between the window and the blinds. I just wanted you to have an idea for the darkness level of the room!

After a few modifications husband got it cut to fit. Fairly simple. Helps keep sun out of bedroom and cooler in summer.

Pros: 1) looks good, 2) blocks heat and glare well, 3) decent "fabric" quality, and 4) good value. Cons: 1) instructions refer to things not in the package and are poorly written, 2) plastic clip thing just crunches up the shade and makes it impossible to spread pleats out evenly, and 3) requires creativity and tinkering to install. What we did: didn't use the plastic clip thing at all, didn't use the adhesive strip at all. We trimmed shade to ~1/2in less than the size of the window, fanned it open, and used clear push pins to hold it in place - one at each corner at the bottom and one at the top to keep it from falling out. Used a woodworking clamp to secure the shade while cutting to size; used a utility knife. The nice thing about the push pins is that we can use the shade seasonally - we will put it up for the hot part of year and will take it down for the cooler part of the year. So it took some tinkering and creativity but it's turned out okay.

These window shades are beautiful. They were easy to install, reasonably priced. I have ordered one more set as we have 5 windows. I would highly recommend them.

I purchased a home with a large arch window 5 years ago and I’ve been trying to find a solution for the blazing heat that comes through it ever since! My arch window is in my home office and is on the front of the house facing west so the 2-3 pm sun was unbearable. A few years ago I purchased a similar light filtering shade from a home improvement store. It didn’t do much other than give some privacy. It did nothing for the brightness and heat but I couldn’t afford to buy a custom made blind and didn’t know there were different affordable shade options until recently. Before I list my review of this product I wanted to mention some things I’ve learned- 1. There are 3 light filtering “degrees” you should know when looking for a shade. A “light-filtering” shade will pretty much just provide privacy and that’s it. “Light-blocking” will block a large portion of the light and heat. These will usually have an aluminum or dark-colored layer in the shade. Then there’s “black-out” options which totally block light. I don’t think you’ll find these in a shade option without getting a black shade. 2. For this product specifically there are 2 “color” options: white, white and silver. White is light filtering only. The white and silver option is the light blocking option and has an additional aluminum layer that will face out the window to reflect the sun. Now to my review- My only regret is not searching and finding/buying this sooner!! I’ve attached an image of my window with the thin light filtering shade I bought from somewhere else a few years ago. Also included is an image with this product. The pictures were taken only 20 minutes apart and there’s a huge difference! I purchased the white and silver option so it’d be light blocking and reflecting. The aluminum is a light silver color and I don’t find that you can even tell it’s silver, not white, from outside. It comes with double sided tape that I find isn’t very useful or sticky but I was able to just sit the shade and shade holder in the window without the need for tape. Now, does some light peak around the edges? Yes. If you accidentally bend the aluminum when trying to fit the window, can you see some wrinkles from outside? Yes. Do I care? No because at least I’m not cooking like a rotisserie chicken in my office! This product is a pack of 2 shades. If you’re a perfectionist and have more than 1 window to cover, I’d buy enough to have 2 shades per window. Use the 1st to get the size right and not have to worry about it being wrinkled then use that to cut the second one to the correct size. Overall, I’m super pleased and so glad I didn’t drop $300+ on a custom composite blind!!

Schnell zu befestigen

Works great! Easy to customize!

We've struggled with an oversize window that was making our bedroom too bright. This was the cheapest option... And also proved to be quite stylish. Note that if your windows are not a perfect round arch then this won't work the best. So there might still be some light that comes in on the side. Overall very good product for the price that you pay.

I love love love these blinds, beautiful and do the job.

Your window has to be exact size we made a template for the arch part so it would fit easy but it was a bit of a struggle .They were easy to cut end to end though .they work great