YITAMOTOR Towing Mirrors for Ford 1999-2007 F250 F350 F450 F550 Super Duty

Pretty happy with these mirrors so far. Mine bolted right on and plugged into the factory pigtail on my 2003 f350 with no modification they didn't have the tab that needs to be cut off on them as some others have mentioned. All power functions work as they should, the lights work as they should, and defrost also seems to work(its not cold enough to tell yet). The only problem I encountered when installing them is the lower rear stud on both mirrors didn't want to seat all the way at first, but I cautiously tightened the nuts down and they eventually pulled in and both mirrors fit just like factory. My factory mirrors had a tiny bit of vibration over bumps , but mainly the passenger side mirror and these mirrors are fairly similar the driver side mirror doesn't vibrate at all, and the passenger side mirror does over bumps but its the same as the oem ford mirrors were probably because mine are on a 1 ton dually its hardly any at all and you can see just fine so its a non issue for me. We have a 2013 f350 at work with the same mirrors except they are factory ford mirrors and they are about the same. They really update the look of the truck, and you can see a lot more especially out of the convex lower mirrors which i really like. Overall a great buy. A pair of new ford mirrors will set you back $1000, so for the price these are great. I'll try to remember to do an update if anything changes.

Had them on the truck for 2 years now on my 2003 F250 Lariat 6.0 and ZERO issues, work perfectly, look excellent. Installed without any difficulty at all, I had to replace a bulb last week, the lights come out the way factory 6.4 lights work.

Easy to install, seriously, maybe took an hour 4 nuts and lift up and the door panel comes off easy access to mirror hardware. I've had them for a year now and they still work great and look brand new. Sturdy as a rock too no shaking!

Install was straight forward on my ‘03 F250 PSD, FX4, XLT, Super Cab. Only took about 15-30min total. Everything lined up well. They came with adapter pigtails, which I didn’t need. I will extend when needed for towing my camper, but will not fold them as that is ultimately what wears them loose. I made sure to tighten them in a star pattern, and they actually bottomed out as soon as I thought I may be getting too snug, so fit is great. There may be a tiny gap, compared to OEM, but for the price I believe it’s worth it. They look great, the smoke tint turn signals look great, (not sure if I like these or Amber better) and have an abundance of view compared to stock. Other than that, nothing to report.

This was the second set of these mirrors I have purchased. A set for myself and a set for my brothers birthday. Both for F350s. These are very solid mirrors with very clear glass and are very solid. No vibration on the highway or off road. I live down 50 miles of dirt road and there is absolutely no vibration or distortions. I made up wiring harnesses to hook up the lights and heater for both my 99 and my brothers 2000 truck. Made the installation very clean and organized. I've tried other brands of mirrors over the last 5yrs and these are the best by far. The are the best value for the dollar. I won't use any other mirrors on my truck. The fit and finish is excellent and I'm a very picky guy. Buy these with confidence and don't look back.

Horrible, don’t waste your money… I have an 03 f250 and once I mounted them there was way too much play at the fold. The way they designed them you can’t tighten anything. When I would drive,the whole mirror housing would fold and move from slow and stop. I couldn’t keep the mirrors adjusted. The plastic is so cheap too. When I would fold them in, the plastic would hang up and pop out of place. Waste of money and time. Also, tightening… 1/4 turn past snug snapped the stud. Rip off Chinese crap

I installed these YITAMOTOR towing mirrors on my 2003 F-250 and couldn’t be happier. The installation was straightforward—everything lined up perfectly with the factory mounting points and wiring harness. They look sharp and give the truck a much more modern, rugged appearance.The extended view while towing is a major improvement over the stock mirrors. The convex lower mirror helps eliminate blind spots, and the power adjustment and turn signal features work just like OEM. No shaking or vibration at highway speeds either, which was a pleasant surprise.If you tow regularly or just want better visibility and a clean upgrade, these are a solid investment. Great quality for the price.

If you have the round 3pin factory connector you will need to run your own wires for marker lights, turn signals, defrost and a ground. Pin 4(red)- Top turn signal. Pin 5(black)- ground. Pin 6(gray)- defrost. Pin 10(blue)- Bottom marker light. I combined the turn signal and marker light wires to both function as marker lights only. Also pictured are the tabs you will need to break off using pliers

Pondered many different sellers before pulling the trigger on this brand/set and I couldn't be happier. Slightly disappointed in myself that didn't pay attention to the lighting lens color (I'd prefer amber lenses) until after I ordered but they light up quite well.Field of view is incredible compared to the OEM on both mirrors. They feel just as heavy as the originals so I think that's why they stay clear (vibration free) on the highway.Plugged right into the OE harness, as expected, without the need for the adapter. Only bits I reused from the originals were the nuts. No fitment issues for bolt alignment or positioning tabs like some have mentioned with other brands.For this price point, I'm satisfied with the look and function. Time will tell. Highly recommended.

These mirrors are perfect I have an 04 F250 these originally had the small square mirrors then I upgrade them to the jelly bean shape set. ( original ford product ) I thaught these were good . But changed them to these ones . They are so much better for vision out of mirrors if your towing or not there so much better stronger more solid in build quality to even the actual mirror lenses have a slight tint on them which takes the glare of sun or headlights down a bit if you got these mirrors you will be more than happy. I only wish I’d done it earlier very well packaged also great product delivery to Melbourne Australia was with in 7 days from ordering. I have already recommended them to some other F250 drivers when they saw them they we’re getting them also. Very Recommend

I got these and fitted them to my truck in Australia but unfortunately they don’t sit in correct position.If have them with the electric adjuster part of the mirror turned all the way in I still cannot see anything out of the passenger one and the driver side is barely usable.It’s clear from the position the main arms sit in they are meant for LHD trucks.

Fit and finish on my 2002 F350 was perfect. Super easy plug and plat install.

Was a direct swap into my 2004 F250, No modifications required other than cleaning up the cuts on the foam insulation. Bolted right up and the harness plugged right in. All the power features and lighting work as expected. Mirrors feel well built and the glass doesn't rattle, only compliant would be the plastic quality in the folding mechanism specifically, first couple times you fold the mirrors in almost feels like you'll break them but they seem to get better each time. Would be 5 stars If they were cheaper, the price is pretty high.