ECOGARD XC10020 Cabin Air Filter

as expected

An exact fit to the manufacturer's filter. Fitting is a different story but that a no fault of the product.

It wasn’t hard to replace the old one using this.. I noticed the different in air flow and things seem good just follow the arrow direction toward back of the car

Se lo puse a mi Altima 2015 y le quedo como anillo al dedo, se siente de calidad bastante buena y mucho más barato que en tiendas físicas, ¡¡¡recomendado!!!

I bought this for my 2014 Infiniti QX60 and it looks exactly like the one that the dealership installed. Now that my car is out of warranty, I don't feel as inclined to pay what the dealership charges for their suggested maintenance. If you look at videos on how to replace this filter, many of them suggest removing the glovebox, but it isn't necessary and seems like a huge waste of time to me. This can easily be replaced in 5 minutes or less with no tools, just make sure you have ample light. This is one of those jobs that is best done by feeling rather than seeing. I felt it was easiest to access if I knelt on the ground outside the car and reached up; the filter is on the left side of the passenger footwell (see photos). Here's how I did it: - Press up on the latch on the housing cover (second picture) and remove the cover - Grasp the old filter by the bottom and pull out and then down to remove - Install the new one with the arrow pointing toward the rear of the vehicle. I put the top left corner in at an angle, then pushed it in with an upward motion as I slid it to the left. Press in on the filter from top to bottom to make sure it is in all the way. - To replace the cover, I put the top in with my right hand and held it in place, then pushed the bottom in with my left hand. Make sure you hear a little click so you know that the latch has engaged and the cover is fully seated. Give the cover a little pull (without pressing the latch) to make sure it is locked in place.