OBA Angle Grinder Wood Carving disc 115mm Wood Grinding Wheel, Grinder Shaping disc for Angle Grinders with 22.23mm Arbor

Bought this after cutting down a tree as close to ground level as I could with a chainsaw, stump needed to be below ground level ready for weed barrier and decorative stone, this it took care of it in around 15 minutes, this is a serious dangerous fabulous tool, if you are not 100% cool with grinders maybe you should bribe a friend that is, I wore a chainsaw face shield and working at ground level heavy rigger boots so at least if i got caught out there would be enough leg left to graft to. A smaller stump I tackled was slightly rotten so clogged the disc a few times but a quick tickle with a wire brush followed by your best Freddy Krueger laugh and its back to work,I have over 40 years in metalwork and have never fitted a side handle to a small grinder in my life, this beast needs one fitted make no mistake, if it snags it kicks hard, great tool for my needs

I have named this tool 'The Bone Hunter' it is a fantastic thing for hogging off material quickly, but you can sense at all times it's hunger for flesh, it's intense desire to sink it's thousand teeth into your body at 5000RPM and go hunting for the bones within...Amazing tool but always be aware if it gets the chance it will go looking for your skeleton...

The media could not be loaded. When new and nicely sharp, this disc really eats through dry wood. The going is a big more challenging when the wood is green and the disc gets clogged very quickly, but wire brushing frequently or burning off the debris helps to keep it cutting for a bit longer.I used it to take a tree stump down below ground level and ended up buying three of them to complete the job. A tree surgeon quoted between £100-£500 plus labour, depending on stump size so spending less than forty pounds on three discs was a no brainer.I hope you find my review helpful

Great for removing material and is very durable.Safety wise, important to use the safety guard and handle as it can kick. Also wood recommend a dust mask and safety glasses/ face shield.

A great disk for wood carving/shaping stays sharp just brush over with wire brush after use to remove any cloggingI tend to use light pressure to get best results let the disk do the workUse with care though as it can bite into the wood and cause the grinder to pull out of your hands

Fantastic just be careful. I use it with handle and guard, ppe etc. Other reviews saying its dangerous are down to user error. Its safe if you take proper care to use it properly. Can get creative with sculpting

Use with extreme caution. The discs cut very nicely and destroy material as expected. But I know of two people and then myself who have been caught out by the kick on the blade, resulting in horrific injuries. Use with a dead switch so if you do happen to loose control, you can stop the blade moving quickly. Genuinley great bit of kit, but the blade jumping is incredibly dangerous and personally I don't think its worth the risk unless you have serious PPE.

About as subtle as a head on collision with a wall. Gouges huge divots in wood in no time. Just what you need if you’re shaping the back of railway sleepers to fit around obstacles.The only negative is the teeth quickly get clogged up with actually has the advantage of making it a little less brutal.