[Nintendo Switch Accessory] Joy-Con Cover Soft Type for Nintendo Switch

PROS:The fit is very snug. Unlike other silicone grips, these are made precisely to fit the joycons with no wiggle room. This is great if you have trouble clicking the L/R and ZL/ZR buttons. Other silicone grips may include a strip to cover the little room between both controllers and create a problem. These grips have yet to come off mid game, which is a major bonus since other off-brand grips tend to do so for the most part. If you are looking to buy something that fits the joycon controllers like a glove, then this is the product for you.CONS:My only concern is that these grips have very, very, very little padding on them. I'd estimate that there's about 1/4" of padding, which is not much when it comes to changing the feel of a device. The packaging makes it seem like there would be a little more sizing to these grips, but unfortunately that's not the case. If you're looking to add mass to your joycons, then this is not the product for you.SUMMARY:These grips feel like a small layer of silicone with a snug fit. For the price, I believe these grips do justice in the fitting alone. About 80% of current off-brand silicone grips for the Switch tend to be very loose which in turn create bad experiences, so if you wish to avoid all of that then do go ahead and buy these. If you're looking for comfort over fit, then I would not recommend these.Until there are other sellers who offer silicone grips with a tighter fit for the joycons, these have the best fit.

These covers are the best I’ve used so far. They do everything better than the officially listened ones. Better fit, feel and ease of use.The fit: These covers feel very snug without feeling constantly stretched. My set even has a good fit along the area near where the Joy Con attaches to the console. There is very minimal “play” or looseness there and these stay put. Especially compared to the official covers.The feel: The silicon has a great balance of soft and grippy. The bulges that rest in your palms aren’t as prounounced as the official ones but still feel great; even with extended use. In fact, I feel that the palm bulges feel better as they’re shaped more ergonomically for me.Ease of use: These covers slide on and off with ease while still keeping a great fit. All buttons and sticks are just as easy to access when these are installed. It will change the feel of some the A,B,X,Y buttons since they sit almost flush with the cover but it shouldn’t hinder your ability to use them. It just changes the feel a little bit. The arrow keys on the left Joy Con are set up differently. There is a large circular cut out that encompasses the entire group of buttons so that their directional capabilities won’t be effected. Unlike the official units, the + and - buttons are easy to use thanks to the circular cutouts. Also, here is no strip of silicon in between the shoulder and trigger buttons to flap around like the official covers have. With the official covers, I found that to be annoying to the point where it actually hindered my use in heated gameplay. So no issues with that here. Additionally, the Joy Con straps will still fit with these installed making dual wielding your Joy Con while in TV or table top mode a comfier experience too. Although I no longer use the straps since they mostly just add unnecessary bulk with the covers on. That said, if you flail around a lot, maybe keep the straps on to prevent your Joy Con from being a projectile... Oh. And as a nice quality-of-life added bonus, your Switch will still fit in a carry case so you won’t have to repeatedly take these on and off every time to pack and unpack your Switch.Would I recommend? Absolutely! These make longer game sessions much more comfortable in any mode you use. These bring me a lot of joy and there really aren’t any cons to these. (Bad Joy Con joke intended...)One final note: I’ve seen some people ask if the Joy Con would still fit in the Joy Con Grip accessory with these installed. The answer is no, they will not. But why would you want them too? Putting Joy Cons with grips on in a Joy Con Grip is a little redundant, no? For a proper controller like experience, either take these off and use the Joy Con Grip OR if you’re feeling industrious; mod your Joy Con Grip by removing the Grip portion. I haven’t done this as I have no desire to. But there are tutorials out there if anyone has interest. As always, mod at your own risk and be aware that you could void your warranty depending on what you do. Modders, ye be warned!

Not sure what others are talking about. This did not work for me. It didn’t fit properly and would slide around.

I bought these after trying out the HDE brand and being severely disappointed. In my review I gave those 1 star. I’m happy to report that these are worth the extra money. Very comfortable, and it holds snugly to the joycon

I've tried (and returned) a lot of silicone Joycon covers, and these are, in my opinion, the best.

Good cover fits like a glove and protects.

It was just what I expected, the grip is great and it doesn’t feel loose, the quality of this one is superior compared to those cheaply alternatives

Excellent.

Les meilleurs protections/grips pour Joycon sur le marché, facile à installer et à retirer. Le toucher caoutchouteux n'est pas forcément des plus agréables cependant.

Très bon produit livraison rapide

PS4のコントローラーカバーだとピッタリ密着で付けるのにコツがいりましたが、このJoy-Conカバーはコツなんていらないほどフニャフニャでピッタリと密着するのか心配でしたが、付けてしまえばそんな心配はなんのその、不思議としっかり付いてくれました。外すのも簡単で気分によって色違いを付けてみるなんてことも出来そうです。握った感触も違和感なく握りやすいと感じました。

ハードタイプからこちらにしましたがぴったりとはまりますが少し浮いてる感じがします。無双を数時間携帯モードでプレイしましたがカバー自体が動く事もなく持ち手もよく肌触りもいいのですがやはり左右の真ん中辺りが浮いているのが気になりますね！ゲームをプレイ中は気になりませんがしていない時は気になります！ハードタイプがぴったりとしていたからなのかもしれませんが…ゲーム中に問題ないなら大丈夫だし気にならないよって方なら買いかもしれませんが、自分みたいに少しの事でも気になる方ならハードタイプか他のメーカーのを購入する事をお勧めします！

Joy-Conは大人が持つには小さすぎてちょっと持ちづらい。これを付けると握りの厚みも増して非常に良い。ただJoy-Conグリップに取り付ける時は外さないといけない。俺はProコンを使っているのでJoy-Conグリップはほぼ使わない。そういう人にはかなりオススメ。