Rotary Switch 19mm 3/4in 2 Positions with Red Led Light Latching Select Selector Switch 12V~24V DC/AC SPDT 1NO 1NC (19mm 2 Positions, Red)

You need to look at the switch’s back labels to see the correct connections.- negative 12v led+ positive 12v ledC commonNO normally open but closed when the switch is pointed to that set of connectionsNC normally closed but only opens when the switch is pointed to that set of connectionsNC does NOT open except with the switch pointing to that side.The LED turns on at 2.35V and is semi-dimmable up to 24V. 2ma draw on the LED @ 24V

So the switch feels like its good quaility but the the action when turning feels soft and cheap. Will it last only time will tell. I like the look of the switch very much so. Did not come with instructions for wiring.

The media could not be loaded.  I bought four of these switches, two red and two blue. I use them to add accessories to my enclosed trailer. Both sides of each switch powers one device wired to the common terminal of that switch. The selector position determines which power source is powering the device. So, in my case, I can either draw power for the interior lights from the tow vehicle or I can draw power from a 12v drill battery that has an adapter which you can see in the video.

very flimsy. I would not put it ona toy.

Very nice maintained, 3 position switch with LED.Easy plug in wiring harness

I guess you are supposed to know which wire is connected to where. There is no wiring diagram included. Of course you won't be using the supplied wires and socket because the switch does NOT plug in to the socket. The switch has a top and bottom terminal with two rows of three pins in the middle. The socket's middle slots are staggered, so the pins don't line up. I bought a red switch and blue, both had the same issues.

The red and blue wires are swapped. Red is common and blue is NO.Switch works good for low current circuits. Looks nice.

The media could not be loaded.