How to installation: 1. Fix the Aluminium profile into the Connector 2. Take off the strip's 3M tape,paste led strip aluminium groove 3. Insert silicon lamp cover into aluminium groove and fasten it 4. Insert end-cap 5. Insert LED Terminal wire into the groove 6. Tighten the lamp under Clockwise direction 7. Insert the square tube into the base,tighten screw with a wrench 8. Connect the terminal of the Lamp with controller 9. Connect adaptor with controller 10. Power-on test Packge Included: 1 ✖ 1 Set of Floor Lamp Product Parameters: Model: CL-FW03 Size: Ø30*1562mm Power: 18W Working voltage: DC 12V LED Type: 5050RGB LED QTY: 90PCS Color: RGBW Shell Material: Aluminum alloy+ABS+Silicone Storage Temperature: -20℃ ~ +45℃ Working Temperature: -20℃ ~ +40℃ Warnings 1. Avoid installing above heat-sourced objects, areas with significant changes in sunlight, airflow, and temperature. 2. Do not look directly at LED lights with your eyes for long periods of time, as this may cause eye discomfort or damage to your eyes. 3. Avoid exposing appliance to outdoors and directly raining, and do not immerse appliance in water, as this may be short-circuited or damaged. 4. Do not use sharp objects or brown contaminants to collide with the lamp to avoid affecting function and appearance.
S**Y
Very good for the price
Initial reaction I thought I had wasted my money, but easy to build by following instructions.It’s sturdy on the ground unless you knock it then it will fall over, but with it meant to be in the corner it won’t fall far.Lights are bright but I was hoping to be a lot brighter even in the small room I have it in.People who are complaining about when pressing the RGB button and only half the lights working, I’ve figured out you have to press the IC SET button and it will adjust to whatever you like… so all good and working great!Remote control feels quite cheap and looks breakable quite easily but they are tons of functions available and so many different settings!Overall my daughter loves it in bedroom, just wish there was a timing function so I don’t have to turn it off after she sleeps all the time!
S**D
Nice mood for your room cheap!
Remote doesn’t reach both easily unless you stand in a sweet spot.
R**H
Can be challenging
Don't get me wrong it's a cool product. I am using it both as a decoration light and my photography. The only issue I have with it is its built quality. The bar is very unstable on top of the legs and if you don't be careful you might break it. the light itself is very cool though.
R**N
Cool but colour lights only working halfway up
Wish the colour lights would light up the full length instead of halfway. I musy have a faulty strip.
N**T
5 stars if sensor was posistioned better
after a little pissin about i got the light assembled..turned it on and posistioned it..tried the remote..assumed battery was dead..the one and only prob with this light is if u posistion it behind or even at the side of ur furniture(as most will) the sensor(poorly located at bottom of stand) wont pick up the remote signal..frustrating coz otherwise nice product.
Trustpilot
1 week ago
1 month ago
