Command Electronics Surface Mount 12 Volt Taillights – Polycarbonate Lens – CSA Certified for The US And Canada – 12V Utility Tail Light – Incandescent Bulb – 2 Pack Tail Light Right

I replaced the original incandescent RV taillamps with these LED models. They are very bright and look great. Top screw holes matched originals, but bottom screws had to be drilled after putting sealant in the old holes that get covered by the lamp base. Wiring colors for tail lamp and turn signal had to be reversed from that molded into the lamp on mine, so test them prior to final installation to the RV. Make sure the base mounts flat and is not torqued because the lenses have to align with groves in the base to snap on tightly. Installation was easy. Be sure to RTV across the top and sides to prevent leakage behind the base and into the wiring hole of the RV.

Received them today and tested on a spare battery. Wow, are these things bright! Can't wait to mount them. They look a little larger than the originals but no biggie. Seller even accommodated my request to ship via another carrier. Thanks again!Edit (07-05-2020): Just tried installing today, it's been really busy lately. Everything works individually except that the turn signals will not work when the tail (headlights) lights are on. Left message for seller for any adviceor if any other piece of equipment required.Edit again (07-05-2020): This just keeps bugging me so just tried this on my four pin connector trailer tow vehicle vehicle (first edit was on a 7 pin connector). Again, individually, all functions work but now when head lights on, there's a faint glimmer of the turn signal working but on both left and right at the same time? I really hope I can get this to work or I'll have a lawn ornament.Edit (07-06-2020): Went a specialty trailer shop that's been in business for over 40 years and even they couldn't say exactly what the issue was. All they could offer was to throw parts at it to see what would happen so I guess it's back to the original type lights for now.Edit (07-08-2020): Finally figured it out. In all my years in telecommunications I learned that one can never have enough ground source so I figured just the ground coming through the 7 pin connector might not be enough so used a heavy jumper cable in lieu of hitching the van to the trailer to ground the van to the trailer. Yes, it now works. Hope this helps someone out there.

Work great, running lights are bright, but the brake lights are more than bright enough to differentiate brake lights from running lights. Easy install and exactly what I needed.The only reason I didn't give it 5 stars is because the product is somewhat cheaply made. One of the plastic mounts that hold the LED board in place arrived broken in the box. Luckily, once installed everything is in place and stable. I understand that for the price, I should expect a cheaply made product. With that said, they do exactly what they need to do at a great price.

I wanted to replace the tail lights and thought that there was a problem with the passenger side tail light. Our 2018 Winnebago RV had come with this, Command Electronics, brand of tail lights just the bulb style, and I knew the bulb gets VERY hot when in use! As I thought I may have been having an issue with the bulb socket on the passenger side I decided to see if I could just replace both tail lights and update to the L.E.D. style of tail lights like our 2017 Jayco 5th wheel has, and many brands have switched to.This company also makes the L.E.D. version and I found it available on Amazon, so I bought the replacement set. I read several reviews about how this new base of the tail lights was slightly smaller causing the previous installation holes not lining up with the new base.When checking the new lights I found that the inside was the main difference between the LED and Bulb versions of the lights. While the red cover lens is the same overall shape the bulb lens has molded in refactors for that single bulb. The all plastic insides of both designs are almost identical with just a bulb or an LED base. What I did was use the new LED insides on the old black plastic base and then used the new red lens to go with the much brighter LED lighting.I gave 3-stars for easy to install as while yes, I got these, there aren't any directions with only a basic wire coloring for what action molded into the back, but those wire colors didn't match with the wiring of the RV, so it does take some work and you can't just splice and go as you might think. Here, experience would be important to get it right, the first time.3-stars for 'value for the money' as while yes, I found them less expensive here than with just a G-search online, for how they're made, all plastic and for what they are, they are kinda expensive!4-stars for 'thickness' (???) I think the old black base was a bit thicker than the white new base and with the new white base where some broken molded clips that didn't affect the LED install when mixing the two units into one usable one for each side. But then the red lens for the bulb style is 'thicker' than the red lens for the LED version. The new lenses look great are much brighter than the bulb lens, even though there is still one small bulb for the tail light that shines on the license plate.Still, since these are the same style and made by the same company, I would buy them again if I ever needed too instead of trying to mount a totally new light fixture by another company.

I have a 2014 travel trailer the incandescent bulbs would keep going out I would have to remove the lenses and twist the bulbs to get them to work so I got the led lights they are the same length but not as tall so I removed the led light assy from the new housing and install them in my old tail lamps which still looks new every thing looks great the led lights are brighter than incandescent bulbs and now I don't have to worry about the tail lights not working

When you're replacing your lights all you need to do is look on the back of each light and it tells you the wiring diagram they work good

I thought I was upgrading to brighter lights than a standard bulb tail light. After installation I took these pictures and they just aren't a lot brighter.On top of that I thought they would be waterproof but the lights and board they are on are no better sealed than conventional bulb sockets and I would assume they will corrode just like regular tail lights.Just plain disappointed!