ROADOMRaspberry Pi Screen, 10.1’’ Touchscreen Monitor, IPS FHD 1024×600,Responsive and Smooth Touch,Dual Built-in Speakers,HDMI Input,Compatible with Raspberry Pi 5/4/3/Zero,Easy Assembly,Driver Free

It is very nice and the Pi will mount on the back. Due to its size and light weight it does want to move around some when you use it. I use it with an AREDN mesh network and normally connect to it remotely, which works very well. For my application it work very well and does not take up very much room.

I used this monitor as a second monitor to display chats, Discord, etc. Plugged it in and haven't moved it since, so basically the most gentle use case possible. The screen no longer works properly, shown in the review photo. I have troubleshot all cables, my GPU, etc, and the issue is definitely with this monitor. The screen looks like this no matter what mode it's in.This kind of complete failure after just over 6 months is simply unacceptable.

UPDATE!!! I have changed this rating to 4 star. A friend came over and was looking at the connections, and suggested I try a different new USB cable for it. I switched out the cable, and it now works. I did not discard the display, and am using it successfully since changing out the cable.The original post below is no longer valid."I have to discard this display after a couple months using it for a Raspberry Pi 4. The touchscreen feature quit, and now I have to use a keyboard, which is tough when out sailing in rocking seas. I will spend more on a different brand in hopes that it will work for a longer time."

Ordered this as a proof of concept for a marine plotter. On paper the specs would be ok. Enough to beta test.Unit arrived with the ribbon connector soldered on backwards. Unable to insert, and too short to make the reach to the HDMI port on the RPi4.Hooking up with regular HDMI port and usb-a for power and touch results in a dead screen. Sending back for refund.**Update** - Customer support was wonderful in addressing the matter. Screen was defective, new replacement arrived in less than 48 hours. New screen turns on and connects as advertised. The touch functionality is not configured properly on my Raspberry Pi, so thats a software issue, but otherwise, it appears to be functioning quite well. No 5 stars due to the whole issue, but 4 is a big jump from 1...

Have had this unit for a couple of years and just made the ISS Above project with it with a Raspberry Pi 3b+ attached to the back. With the included wiring and instructions everything was a breeze and works wonderfully.For those needing a case, there is one on the Printables website called "Touchscreen case for 10.1" Pi console" that fits this model perfectly - shown in attached pics. The design provides airflow and allows the cables to route through the back for a clean look. 10/10 would buy this screen and print the case again!