Rocelco46" Large Height Adjustable Standing Desk Converter with Triple Monitor Mount BUNDLE - Sit Stand Up Computer Workstation Riser - Retractable Keyboard Tray - Teak Wood Grain (R DADRT-46-DM3)

I needed a way to support three monitors and add sit/stand capability to my desk. This desk fit the bill. It was pretty easy to put together, and fairly easy to mount the monitors and get them aligned. I especially liked that they thought of cable management. I didn't think about it when I ordered, but being able to swivel one monitor around so others in my office can see is really nice.My only complaint is that the material of the upper surface isn't quite stiff enough to support the weight of three monitors hung on the frame. After a few days I noticed the entire frame was leaning toward me, allowing everything to droop. Putting a straightedge against the platform showed that it is bending from the overhung weight of the monitors. For now, I've added a metal shim under the front of the frame escutcheon to straighten it (see pic).

Packaged well although I did see a ding on the back edge of the unit. Didn't affect the operation of the unit. No assembly required.Just clip the tabs securing the keyboard and you're good to go. Love the large work surface. Almost as wide as my desk. Love the keyboard holder and now gives me a nice amount of work space which i didnt have before. Fits my two large monitors and my laptop. I can easily raise and lower the unit with the levers on each side. Didn't know if I could live with the teak color but its fine. Good choice and I recommend.

Love the desk, performs as expected. Only downfall is when using an adjustable desk mount, the mount itself hits the frame on the backside preventing it from going down all the way so you can’t use the desk comfortably in the seated position. Works great standing tho or if you have standard monitor mounts. Adjustable mounts that clamp or attach to the desk is almost a no go. Only option I seen that could work is getting single adjustable mounts that extend pretty far to the side so you can attach the mounts on the back corners instead of just the back. Should work that way for dual monitors. We’re enjoying it! Just thought I’d pass our input out for those looking for one and maybe for the engineers to improve the desk in the future.

I generally wouldn't mind having a small bit to assemble but was pleasantly surprised at nothing to do except cut a few zipper cords and that was it. And liking how easy it is to move up and down. Almost like it does all the work for you.

I desired a sturdy standup desk that would have the ability to hold 3 27-inch monitors with a 3rd party monitor stand. This desk is extremely well made.Engineering and craftsmanship. The table has a laminate top with decent crafted nuts and bolts to hold the desk together. The desk comes preassembled, and you do not have to assemble anything. You take it out of the box and set it on top of your existing desk.You will need more room for a mouse on the keyboard pull-out section if you have a larger keyboard, such as myself. I did order a separate 3rd party mouse attachable table due to the need for more space. My recommendation for the manufacturer would be to create and offer a mouse attachment as an available add-on.I have seen a few people ask about the height of this desk. My existing desk is 30 inches high, and then when you set this standup desk on top, you attain an additional 20 inches maximum when you extend the desk. I am 5 feet 10 inches tall and can not raise the desk the entire way; otherwise, it is too tall for me. So for those of you that have said you are tall, I would not see an issue for someone that is even 6 foot 4 inches to use this desk.As I have already said, I am using a 3rd party monitor stand and 3 27 inch monitors, and I have had zero issues with the desk being stable and staying up. Rubber is on the bottom of this desk, so it does not slide or scratch your table.This is an excellent option if you want a more oversized standup desk that can handle three monitors but intends to stay within a budget range. I provided the four stars on ergonomics only because a mouse does not fit well on the keyboard slideout. Even with a standard keyboard, I can see you being crammed and needing more room.

Works as advertised, simple to set up, but the keyboard tray was unsteady as pointed out by other reviewers. The tray rolls back under the top, but the rollers are too loose. As a result, it's pretty unstable as shipped. The simple fix was a large zip tie on each side to keep the tray from sliding back. Yes, I now can't stow my keyboard underneath, but I've never needed to do that so no harm done.

It does what it was designed for....however I was a little disappointed in the craftsmanship. Here are a few things that could have been done better:1. The keyboard shelf. When pulled out to use, the right side "locks in place", like it should, however the left side does not, so it is wobbly.2. Also, the size of the keyboard tray is small, just big enough to hold a full size business keyboard, little additional space for a mouse.3. The monitor stand looks impressive, but is very sensitive. That is, I have to frequently re-tighten the bolts to keep the screens in the correct positions. I've learned that as long as you don't touch or shake the desk, they stay pretty much in position.I do appreciate the size of the desktop along with how easy it is to raise and lower to any position.Now, perhaps my issues are "one off" and others don't experience the same problems, I hope that's the case.

Works good, takes up desk space but that can’t be avoided.

First of all, the package arrived fast, much earlier than the estimate time.Box was designed to protect the converter very well, so it came in good condition even it's big and heavy.The available width of my desk is 47 inches, so I looked for a standing desk converter not too small that might waste much working desk space. This 46 inch converter is exactly what I need just like tailor made.This is a good quality converter and well made.The teak wood grain looks good with my oak desk. The surface feels smooth in touch and not easy to have figure print. Very easy to clean.Lot of desk top space for a 32" and 27" monitor, and some documents/notebookKeyboard tray is big enough for a ergonomic wireless keyboard and a track ball. It locks slightly when fully extended so it's not easy to slide back when typing.At lowest position on my desk, it's like a monitor riser. Although there are gas pistons to assist, you may need to apply some forces depending to lift it to a standing desk height, depending on the total weight of stuff you put on it.People should know the maximum weight capacity of this unit - 45 lbs. I put a 32" and a 27" monitor, a pair of computer speakers, a keyboard and a track ball mouse. The total weight is almost reach the maximum load capacity. I guess when I type, the weight of my hands apply might exceed the limit.Since the weight of monitor stand might be heavy for safe and stability, at least it is heavy for my Dell monitor. People plan to use 2 big monitors or 3 monitors may consider the total weight or order the Recelco monitor mount or the gas pistons might be damaged by over loaded.

Doing research for a desk riser, I didn't see a lot of reviews supporting my exact needs, so I hope this helps someone.First off, product is great quality and I'm very happy with my purchase.I got the 46" as I am a music producer and needed to fit two large speakers + at least one large monitor. I have a tiny 13" e-ink monitor off to the side that just barely fits in addition to the speakers and primary monitor.I am about 6ft1 tall and was concerned that it would not go high enough for proper ergonomics with the mouse and keyboard. This heavily depends on the height of your desk, but worked out perfectly for me. I use it at it's maximum height so if you're substantially taller than me, you may need to raise the entire desk riser to be higher.Another thing to consider is that while seated, this will raise your keyboard and mouse about a half inch. For me, my chair doesn't go any higher and my desk was previously the perfect height for keyboard ergonomics, and now I find it is ever so slightly higher than I'd like, but not awful. This will be different for everyone depending the height of your desk + chair, and your body size. Worth doing the measurements before purchasing!Incredibly simple to raise or lower the desk, takes 5 seconds and is encouraging to constantly switch between sit or stand every hour or two. This was important to me and I'm very happy with this aspect.Overall, very happy. My recommendation would be to ensure you measure your current set up and see the measurements provided for this product to ensure it is right for your space/height.

I just received this riser this evening, and setup was a breeze! I literally lifted it out of the box and onto my desk and it was ready to go.I’ll report back and update this review once I’ve been using it for some time, but so far I’m very pleased.I have a fully motorized sit/stand desk at my office, but I needed something with more shelves and drawers at home so I opted for a conventional sitting desk. I got that set up this past weekend and quickly started my search for a riser to complete the setup.I actually like the manual lift just fine, and it appears to be nice and sturdy. It’s not awkward or heavy to raise or lower at all. I can set the height any level I want, and at 6’ tall the highest setting would be my upper limit for comfort. The lowest setting is actually a little higher off my desk than I’d like, but I think that’s simply unavoidable. Honestly, it’s probably only a tad too high because my chair is broken and I can’t adjust it up even a little bit. I think with a functioning chair the height would be perfect.All things considered, my first impressions are that I would highly recommend this riser!

This is a good adjustable desk converter. The only issue is the short width of the keyboard and mouse tray. It should be at least 10cm wider so you can rest your arm it and work with mouse much more ergonomic and comfortable. I hope they consider correcting this issue for future productions.

I am happy with my purchase. It's perfect for standing and sitting while you work. I just wish the keyboard tray was height adjustable. I find it is too high so I have removed it.