7 inch LED Headlight Fog Passing Lights DOT Kit Ring Motorcycle for Touring Road King Ultra Classic Electra Street Glide Tri Cvo Heritage Softail Slim Deluxe Fatboy Chrome

Rocco had me get this set for his 2014 Road King. All the lamps installed easily and fit perfectly using the original Harley hardware, supplied wiring adapters made it a true plug and play. Alignment did not need adjustment, and the lamps are significantly brighter than the stock halogen bulbs. Hopefully the reliability is as good as the construction quality. No radio on this bike, so no idea if there are any electrical noise issues. The $500 sets might indeed be superior, but given the basic objective was to see and be seen better than the stock setup the bang for the buck of these is hard to beat.

Would definitely buy again. These truckmall lights on my 2009 road king fit perfectly, plug and play no cutting wires or anything as well as no other modifications needed. When you plug in your running lights make sure to turn them on so that you can ensure they are plugged in right if it doesn’t turn on just switch the plug around before installing completely it will save you some time. The lights have a nice beam pattern and are much better and far brighter than the stock halogen bulbs. I know guys who have spent 3 times the money for pretty much exactly the same lights. I don’t think you’ll regret purchasing these lights, I sure don’t I’m very happy with them and would buy them again. I hope they last a long time and will post an update in a year or two. If you don’t see an update then they are probably still working great and I’m still happy! It’s hard to tell the brightness difference in a picture but take my word for it they are far superior to the factory lights.

I don't normally leave reviews but I decided to with these lights. I looked around before purchasing and there are several in this category and price range. I thought, at this price why not try it. They came quickly as normal with most Amazon stuff and they were package very nice and securely. I have an 07 HD Ultra and I installed them this morning in about 30 minutes, which included cleaning and polishing some of the hidden areas as I went. I'm not a mechanic but I do like to tinker around but I really believe that anyone could install these correctly. There were instructions and they were good. The main light came already installed on the housing and all the lights were plug-and-play for me. Some of the reviews have directions and suggestions to mitigate the lack of tightness of the chrome rings and the screw to bolt change over that holds on the main trim ring. Based on my set, the manufacturers were listening and made some adjustments because everything snugged up tight for me including the smaller bolt included to hold on the trim ring. I'm very impressed so far and it is a drastic change in the look of my bike because I went with the black background. The light is much brighter than stock and is a crystal clear white. I've never looked at Harley Davidson to upgrade to lights like this so I don't know what they would charge but nothing at any HD dealership is cheap. I will see how these hold up and post accordingly but if your on the fence, I say go for it, these look great!

Installed on my 2015 Indian Roadmaster. The headlight socket was direct fit no need for any of the adapters and I had to use my old bracket and ring but fit just fine. As you can see in the picture for a Roadmaster/Chieftain you will have to remove the front fairing to get to the passing lights but relatively easy only about 10 screws around the fairing. the two wire ends with no connectors is hoe the passing lights come with their connector so I used the solder splice and just cut off the connector off the old passing lights and put them together. Passing lights fit perfectly in the socket. Super easy to install. Be aware if your passing lights don't work its because the connectors that come with the passing lights are not dummy proof and can be installed backwards. But super easy fix just turning them around if they don't work when you are done. No modifications are needed for the bike or lights say for that using the old connectors from the old passing lights. Last photo is of them installed with the fairing on. They are super bright but not as bright as day-lighters but blow the stock lights out of the water. Actually get flashed all the time now by other cars. The lights are bright white and have a good range on them to see down the road and the brights are high so you can see even farther. I only put 3 stars for the longevity as I have only had them on for a few days so dont know yet. We will see. Ill write another review if they go out fairly quickly but for now I am really happy with the purchase.

I have a 2006 Electra Glide Ultra Classic. The installation ring that comes with the new 7-inch LED headlamp is attached to the light when it arrives. I simply took out the old headlight and had to remove the original existing ring that was inside the housing. The fog lamps/passing lamps, were easily installed. You have to use the metal rings on the back of the original headlamps in order for the new lights to seat securely, otherwise there will be some movement of the lights inside the housing. The only issue that I had which prevents me from giving this 5 stars is minor. The original screw that holds the outside trim ring in place is too small for the hole in the new installation ring that come with the kit. Also the hole in the installation ring is not threaded. There are no instructions and I did not see anyone mention this in any of the reviews I read. You can either purchase a self tapping screw at the hardware store, which will in turn will make the hole in the trim ring larger. Thinking about this, if I ever want to switch back to the original halogen light bulbs (in which I don't think I ever will) it could cause an issue with the original screw being too small. So I purchased a stainless steel screw and lock nut with J-B weld steel epoxy. I then put the screw through the whole of the new installation ring that came with the new headlight kit. I put the nut on the back and tightened it so there were no gaps between the nut in the installation ring tab. I then put the epoxy for Steel around the outside of the nut and against the back of the tab the nut seats against, making sure I did not get any epoxy on the threads of the screw. I purchased the epoxy that takes 12 to 15 hours to cure, it is the strongest and it works perfectly. Other than that the lights are plug-and-play with the 06 Electra Glide Ultra Classic. First time I got to ride at night, I noticed a dramatic difference in brightness on the road. I am very happy with my purchase!

So far so good. I've got a Yamaha Roadstar 2002 Midnight so it wasnt a plug and play and nothing i couldn't tackle for wiring. Simple. Just take your time and test along the way and before fully assembling. I did have to get new (bigger) passing lamp enclosures but I was working with some $30/$40 Amazon special ones with led rings built in. With something like that it should be expected do by replaced. These look nice. Can't decide throw which is brighter. The passing lights on with the low beam or when I hit high beam and passing lights are off. Its a close tie. Heads up too....make sure you cruise around the block before any adventures or bring tools with as you may want to tighten or adjust light alignment. Also I had fog lights already. Thats not included.

Comes with everything you’ll ever need! Rewired every single light on front of my bike with these just because my stuff was so corroded and old! Love the look at the front and the out put of these at night are fantastic! Bright and riding safe at night. Perfect size!

I'm sorry for wasting your time, I gave it another try with installing the extremely bright led lights and I'll tell you what, they are thee brightest lights I've ever seen. The video says to throw out the metal ring but that was the problem, I needed to use it and once I did, it was easy to install. So I'm all set with my lighting problem, now I need other stuff that I will be buying from this store. Thanks again

Well packed and easy to read instructions.. quality feel ! Very happy

Product was more than expected Sent promptly

Se ven bien...

Perfect fit on my 2007 electraglide, had add spades to the spotlights but was very simple. Definitely received

These lights were very easy to install, look great and nice and bright. Love them