Tailgate Table Rear Foldable Cargo Shelf Aluminum Alloy Storage Shelf MOLLE Panel for Jeep Wrangler JK JKU JL JLU

Nice product. Good materials, stainless steel bolts. Video/Instructions are helpful but miss several points: On the JL, the extra long bushing is for the lower left corner. If you don't have a 13 mm drill bit, standard drill bits are 1/2" & 5/8th, use 1/2" for the 13 mm holes. Then need to angle route the drill bit for proper fit. Instead of measuring location for holes, look for the factory markings on the back of the Mopar panel. It is an easy install.

I was torn between giving the EOIS Tailgate Table Rear Foldable Cargo Shelf 4 or 5 stars. I really liked the end result of the installation, but after adding up all the annoyances of installation and the clear misrepresentation of it being aluminum, I decided on four stars. I installed the unit in a Jeep JLU 2024 Rubicon. The Good: -- I really like the unit as a whole. It's compact, folds up nicely, and does not rattle when driving. -- The latches are very secure and strong. -- The molle pattern is excellent, and it is the main reason I purchased this one. I hang Molle bags off of it, and these lay underneath when the shelf is deployed. This provides a very efficient use of space in the back of a Jeep JLU. See picture -- It's offset from the rear panel. See picture. I was concerned that it would rub against the Jeep's plastic rear panel, but while measuring for the mysterious longer spacer, I realized that the panel is actually offset about 1/4", leaving a gap between the shelf and the Jeep's door panel, which is great. -- The Jeep's rear door panel needs to be removed, and it is very easy to do so. With a little gentle prying with a plastic tool, the panel just pops out and then easily pops right back in. -- A 1/2 inch drill worked fine for the holes vs the stated mm size in the instruction that needed to be drilled in the Jeep panel. The Bad: -- NOT ALUMINUM: The seller claims this is aluminum allow in the web page description. It is too heavy to be aluminum, and testing with a magnet, as shown in the attached video, confirms it is made from steel. The only aluminum used is the four spacers used to attach the steel shelf to the Jeeps rear door. -- Very poor instructions. Someone handy and understanding of working on a Jeep should only attempt this install as you will have to figure out some things on your own due to the poor-quality instructions. -- They provide one spacer much longer than the other three! Why? It must be a mistake. After much measuring, we determined all the spacers should be the same size and hacksawed the long one to match the others. This is really poor execution on the EOIS part. -- The top shelf is not level, and there is no easy adjustment. It tilts down. -- After some discovery, we found that the holes to be drilled were already marked with dimples on the inside of the plastic door panel. It would have helped if there was more information in the instructions and pictures. We marked these locations with blue tape in the picture. Some hints in the instructions for this would have been very helpful.

Had this on the 2014 jeep for about two years now. Forgot to write a review... works like the day I installed it. Great system with no rattle.

No drilling required, which was what really sold me. I had previously tried another shelf that was "bolt on direct fit for JKU" and it wasn't, so I was a little nervous about this one. Pretty easy install, about 20 mins. The bottom right mounting bolt gave me a little difficulty, I'm assuming something is blocking the bolt from sitting perfectly vertically. This works really well when paired with a glass mounted LED strip as pictured, creates a nice little station for your overlanding needs. Also some people were worried about a rattle with this, the dual latches keep it tensioned very well and I don't hear anything over your standard Jeep noises.

This is an OK table with modifications. There are mounts for both JK and JL. I installed on JK. Install is easy. Just remove the plastic wire cover by pulling up/off from bottom. Then use the pre-assembled hardware to install as instructions show. I did not like the wiring exposed so just covered with some Gorilla tape. The tables both had a real heavy slant to them, not good for cooking on. I re-drilled the main shelf wires to make the shelf level. You could easily replace them with longer ones as well. If you are not cooking on the platform then it will not be an issue. I decided to do away with the top shelf, I thought it would be handy when cooking having extra space but found it was just in the way and clumsy. This opened up the space the shelf took as a small recessed area to mount items to. I used 1/4" plywood and covered in carpet to store a few of my most used items. I also mounted a piece of 3/8 plywood to the main shelf to use as a base to cook and as a base to mount my tool holders too. Works pretty good in this way. I will run this for a while and see how I like it, probably will build my own next but for 90$ or so this is a good option to see how useful this type of table is for you. It does feel a little flimsy but with the MOLLE attachments and plywood what little noise it makes is dampened well.

Product is well built and well packaged for shipping. Arrived with full color instructions. Fits both JK and JL models. I installed this on a 2016 JK Inlimited Rubicon. Installation was straightforward and required no drilling. You will need a few additional tools such as 3 mm Allen wrench, 10 mm socket,ratchet and adjustable wrench. Installation took less than 30 minutes. My biggest concern before ordering was rattling when driving but it is well put together and has bumpers in strategic places that hold everything in place. I'm not sure why I waited so long to purchase one of these definitely comes in handy on the trails.

I installed this on an Ineos Grenadier. Worked well. Required holes to be drilled in back of shelf. IT IS NOT ALUMINUM

Excellent product for the price but you have to throw away the instructions if you have a JL. Abandon the standoffs. Those are the aluminum collars that are supposed to provide spacing between the painted body and the tray. There's absolutely no reason to use them and they just increase the opportunity of you screwing up. Instead, remove the rectangular top portion design for the factory rail system. You can put that away as you don't need it at all and no reason to drill through it. However you do have to make two small holes directly opposite the two bottom outermost threaded standoffs on the door. This is pretty easy to do. Put the aftermarket screws in the holes to almost flush level with the panel. Just have them stick out a quarter of an inch. Then coat the heads will you put the screwdriver in with thick grease. Just a dab on each one. You're not going to use it for lubricant. Now position the top part of the black plastic panel you pryed off. Make sure it's perfectly centered. Then swing the bottom down and contact it to the screws. It should not be enough to clip it in as the screws should be preventing it. Now remove it again and you should have two grease marks on the back of the panel from the screw heads. That's where you're going to drill. Drill a 3/8 hole from the inside out right in the center of those Grease marks. Remove the screws and clean them up. Now put the black plastic panel in without that rectangular insert you discarded. Now install the Trey using the four bolts washers and lock washers. You will be able to get the tray flush up against the plastic interior panel. It may be a little difficult to get the bottom screws because of the angle so I recommend maybe using an allen head at the end of a quarter inch driver extension? Either way you can get it in there. Don't torque them down too tight or you'll crack the plastic. That should be it see the pictures. Very flush and professional looking.

Easy install for the Jeep Jk Need to install some Molle bags or put a towel in between the 2 shelf’s when in the closed position or it will rattle. It’s a super easy fix and if your mechanical in any way you can change a few parts to make it even better for low cost. But as it is , it’s perfectly fine. When installing the mounting posts, you leave them loose as per instructions and then mount the table on the studs. Now put the nuts on but just finger tight. Then tighten the mounting posts. After that, when you tighten the nuts on the studs… there is t much thread so only tighten until they stop, if you over tighten, you will break off the stud. I also put some weatherstripping in some areas that could’ve possibly caused some rattling, but it may have been unnecessary. It’s a solid table and I really like it only had it out a few times where it was actually used for camping and it’s been absolutely fantastic. The cables that hold the shelves have held up nicely, although I may replace them with something a little more robust.. for the price point. This is good and it works.

Mesa muy útil y práctica, fácil de instalar, en el Jeep JKU, no se requiere hacer ningún orificio, viene con todo lo necesario para su colocación en la puerta trasera del auto.

Jeep Wrangler Jk 2011 70th Edition Kofferraumklappe geht wegen dem Subwoofer nicht zu. Musst ihn ausbauen. Montage selbsterklärend und relativ einfach. Robustes Material. Die Schnappverschlüsse neigen leider zur Schwergängigkeit, Gefahr die Finger zu quetschen. Die Fangseile verklemmen sich komisch zwischen dem Tisch und der Halterung. Verbesserungspotential. War leider über der Rücksendefrist, sonst hätte ich ihn nicht behalten.

Fitted to UK Jeep JK 07 and it was really straightforward and works very well. Very pleased so far!

Love this, it fits my 2021 jeep sahara limited. Easy to install.