P5 indoor full color led display panel 64x32 pixel 320mm x 160mm size 1/16 scan smd 2in1 two in one 5mm rgb board p5 led module

If you know what you are doing you can get it to work.It does nothing by its self, requires something to control it (can use raspberry pi and GPIO pins) and a beefy power brick 5V around 10A if you plan on using 3 of them.(Update)I've been able to power it without the beefy power brick, normal usb phone charger 5V has worked for meI use it as a rail departure broad, so as its text, most of the screen is off.Using a power bank lasted around 3 hours (10000 mAh), powering both the raspberry pi and the led panels.

Looks good and works well. Read all the stuff that is available on line, and enjoy.One slight snag, is that the fonts are quite large so have to consider any text that you use. Example: you can use "WELLCOME TO" and it will fill the width, so rest of message must go on next line. So you can have 4 rows of text only.

Joined two of these together to make a scrolling led sign, works a treat and no dead pixels. Probably going to order a few more over time to make a video wall. I’ve powered them using an ESP32 for the signal and a 5v power plug 1a powers 2 panels nicely drawing approx 300mA.

Good value