TALOS E3 MESH WH

Great case easy to build in ..perfect for my daughter first pc . Comes with 3 fans saves extra cost . Looks great .

Great case, quality is good, good value for money

Small, clean and pretty easy to build in. Lacks a few nice features that you might find on cases but more expensive from branda like MSI or nzxt but still well worth the price. Arrived in damaged packed with styrofoam. Comes with some argb fans . Decent for pre installed fans. Airflow is good plenty of options for fan layouts Cable management is ok but don't expect to have a lot of space at the back to hide the cables The performance day to day is good. Leaves plenty of space on a desk due to it's small footprint. Has a glass side panel and magnetic mesh covers for the top vents.

Very neat and stylish, smoked glass side panel and most importantly a switch on the top to turn off the dumb LEDs.

Genuinely fallen in lose with the case I have been following gamdias since 2015 brought one of there cherry mx blue keyboards ps to all of you they still make good keyboards, brought a replacement start of last year, also make great aio coolers got one to fit inside of this case as works prefect

I don't usually write reviews, but I thought I should really share my experiences. I've been building my own PC now for the best part of 30 years. I can honestly say pay a bit more and go for a brand. The build quality of this case I feel is cheaply made, issues with motherboard tray being uneven, cheap flimsy material for the case. So for the money you pay, it feels like a rip off. Pay another 20 - 30£ and you can get a cooler master or something akin to that. I'll never skimp on a case again.

Great case for the price. Fans are full speed but looks good and are quite enough. Recommended if on budget

Quite a cheap case so I understand the quality but it’s pretty bad, some of the metal where the screws are were split and sharp because of the metal, the HDD slot screws were also split. It’s a decent case but you can find way better quality for £10 more.

جيد حجمه صغير شوي لاكن يمشي

Great looking case leds are fantastic and have lots of options only issue is how dark the side panel is

TL;DR, this case is a fantastic value for for $60. If you're building a budget system or need a cheap case to house some spare parts, I can 100% recommend this case. Pros: - Full size ATX motherboard support is huge for this price. Also has no issues fitting mid-sized GPUs. - The 3 included fans move plenty of air and are relativity quiet. The RGB lights get bright and look really good. - This case's design makes it look as good as cases that cost twice as much. Cons: - The case is very lightweight, but in a cheap feeling way. The case feels like it's made of really thin metal, but feels sturdy enough protect the system. Maybe don't put anything to heavy on top of the case. - The fans are also not PWM, they are powered by a SATA connector so they always run at full speed. Also the RGB is controlled by a button on the case and doesn't connect to the motherboard so RGB control is a little bit limited. - There isn't a ton of space for cable management, and with a full sized ATX motherboard, you end up covering up a few of the cable management holes. - The case is also rather compact, be sure to check GPU clearance. Mid-spec GPUs will fit just fine in this case but some of the longer 3 fan designs may have length issues. - The front fans have no dust filter, but there is a magnetic dust filter for the top fan slots. Overall, you can tell where the corners were cut to save on manufacturing costs, but those cost saving measures were planned really well. This case doesn't meet the quality or features of something like an NZXT H5 Flow, but it sure looks and cools just as good as one.

Petit boîtier qui fait totalement le travail. Il est compact et ne prend pas trop de place, mais il est assez conçu pour ne pas trop chauffer et laisser l’air circuler correctement. Je recommande ce produit.

Ich habe mir das GAMDIAS ATX Mid-Tower Gehäuse in Weiß bestellt und bin positiv überrascht, wie viel man hier für den Preis bekommt. Das Design ist modern, mit einer schicken Mesh-Front für guten Airflow und einem Seitenteil aus gehärtetem Glas, durch das die Hardware perfekt zur Geltung kommt. Gerade in Weiß wirkt das Gehäuse sehr edel und passt gut in ein helles Setup. Bereits 3 ARGB-Lüfter (120 mm) sind vorinstalliert, was einen großen Pluspunkt darstellt. Sie sorgen nicht nur für eine ordentliche Kühlung, sondern bringen auch eine schöne Beleuchtung ins Gehäuse. Die ARGB-Steuerung lässt sich problemlos ins restliche Setup einbinden. Der Luftstrom durch die Mesh-Front ist spürbar stark, sodass die Komponenten zuverlässig gekühlt werden. Innen ist ausreichend Platz für ein ATX-Mainboard, große Grafikkarten und zusätzliche Lüfter oder Radiatoren. Auch das Kabelmanagement ist gut durchdacht: es gibt genügend Durchführungen und eine Netzteilabdeckung, sodass man alle Kabel ordentlich verstecken kann. Dadurch sieht das System am Ende sehr aufgeräumt aus. Die Verarbeitung ist solide – keine scharfen Kanten, das Glas sitzt stabil und die gesamte Konstruktion wirkt langlebig. Für Bastler ist das Gehäuse angenehm zu handhaben, da man schnell an alle Komponenten kommt. Die Lieferung über Amazon war wie gewohnt schnell und sicher verpackt. Alles in allem bekommt man hier ein schickes, gut belüftetes und durchdachtes Gehäuse mit bereits verbauten ARGB-Lüftern zu einem fairen Preis. Fazit: Optisch modern, gute Kühlung und viel Platz für Hardware – eine klare Empfehlung für alle, die ein weißes Gaming-Gehäuse mit ARGB suchen. ⸻ 👉 Soll ich dir auch noch eine kürzere Gamer-Version schreiben, die stärker auf „cooles Design, starke Lüfter, Glas-Seitenteil“ eingeht?