6PCS oscillating Tool Scraper Blades Universal fit Multitool Scraper Blades, Compatible with Dewalt Dremel Rockwell Makita Bosch Fein Multimaster Milwaukee Porter Cable Ridgid Ryobi

I filled saw cuts on a garage floor with polyurea epoxy and I used these to slice the top off flush with the floor. These blades are not made from the hardest material and the cutting edge would round over after a time. A metal file took the edge off quickly however.I used two of these blades to remove epoxy from 160 feet of saw cuts. Good blades for the price.

Scrapers did excellent job at removing excess Gorilla Construction Glue Ultimum from boards. Best way I have found to date to do this and does it quickly and easy with Dreemel tool.

Work well to lift old linoleum bonded to floor underneath. Also, taking off adhesive ,left under carpet.

This was just what I needed to help remove two layers of glued down linoleum flooring. It's a slow process any way I do it, but this has made to process so much easier. The glue will eventually build up on the blades, but easily cleaned with mineral spirits. Can think of many uses for these.

Name brands definitely longer lasting, but these get job done and at an excellent price point. Just be prepared to sharpen as needed.Task was removing non-skid tape. Basically heavy foil tape coated with coarse grit and sticks to surface with permanent adhesive. Name brands would last for dozens of feet longer than these. But, for the task at hand, these had an overall consumables cost a third, Name less, compared to big name brands. Maybe 5 minutes of longer job time to switch out blades a few times.

They work just as good as the manufacturers but a lot less money

Liked them a lot, quality bits.

I purchased these as a back up for some more expensive ones. These have out lasted the brand name ones.worked well and have been resharpened. They could be a little harder, but for the money they are great value.

Used this to peel off glue from old vinyl tiles; they're very sharp when fresh, but they do get kind of dull faster than expected, mind you I would hit nails every so often, so that probably would dull it. The amount you get is great, so going through a bunch doesn't feel bad. Did an entire 900 square foot floor with this. Still have a few left.

very satisfied

Für mich ist das Produkt ok - und wenn ich auf den Preis hier seh - kann man damit fast nichts falsch machen - es sei denn - man braucht nicht die Sachen

Arrived on time and well packaged (thanks Amazon)The reason for only 4 stars is because~1/ I had to clean off the excessive amount of oil on these blades.2/ I had to sharpen the cutting edges as they were slightly rolled over during manufacturing.This took about 2 minutes per blade, but now they are clean and sharp. I use scraper blades mainly for removing silicone caulk from around bathtubs and tub surrounds (fiberglass and tile) as it cuts the time spent doing this job by 2/3rds ( I am a handy man and look after over a hundred low income housing units), but you need a sharp edge and a steady hand. These blades are well made, fairly thick and quite stiff (except for 1 and 2 above) and can be resharpened without to much effort. Compared to locally bought scraper blades, they are a very good quality and should last for a lot of projects. They fit on my Milwaukee M12 oscillating tool and should fit on my DeWalt XR Max 20V oscillating tool with no issues. For the price I would definitely purchase again even if I do have to clean and sharpen them, that's a small inconvenience in the grand scheme of things.Hope this helps 🤓

These worked much better than expected. I thought that removing the glued carpet from concrete would take several blades but was able to do the job with only 1.