🚗 Light Up Your Safety with Style!
The FIERYRED Third Brake Light is a high-performance lighting solution designed specifically for 2009-2014 Ford F150 models (excluding Raptor). Featuring 18 LEDs for superior visibility, an IP67 waterproof rating, and a user-friendly plug-and-play installation, this brake light ensures safety and reliability in all conditions. With a lifespan exceeding 5000 hours and dedicated customer support, it's the perfect upgrade for your vehicle.
Brand | FIERYRED |
Color | Black |
Specific Uses For Product | Third Brake Lights |
Vehicle Service Type | Ford f150 2009-2014 |
Year | 2009 |
Special Feature | Waterproof |
Wattage | 55 watts |
Auto Part Position | Rear Upper |
Lens Color | Smoked |
Lens Material | Plastic |
Assembly Required | No |
Manufacturer | Zhongxin |
Item Weight | 12.3 ounces |
Package Dimensions | 14.65 x 3.31 x 2.64 inches |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | 111 |
Special Features | Waterproof |
J**K
Thanks
Works great had it for over a year now and happy with it. Easy install and looks awesome
M**.
Great 3rd brake light.
I’ve owned this brake light for 2 years with no issues. Light is pretty bright and the Fitment is perfect. Installation was very easy too!
S**N
Easy as 1...2...3... Done!
I received the package and it was in fine shape with the product inside wrapped up in bubble wrap with the lens covered in shrink wrap. Very nice and protected. I gave this an overall 4 star review simply for the fact that there were no instructions. There were two simple rubber washers? That I did not end up doing anything with for the install.However, everything is straight forward and simple. Remove the old lamp/housing, detach the factory bulbs, and plug in the new LED squares and boom! You’re almost home. Once re-installing the housing with the factory screws you are done with it. Just be sure not to over-tighten as you may crack the plastic housing on your new product. A tip, I used a black sharpie on the old factory screws to black out everything, so we’ll see how this hold’s up versus spray painting the screw heads.Lastly, I really like the new piece on my F-150 as I continue to black out all the emblems, logos, light housings, etc. The only thing about this product is that it does NOT sit flush against your cab. It does protrude slightly about…1/4” of an inch or so, but it provides a nice sealed attachment. Hope this all helps.
P**A
The 3rd brake light
The other posts are correct. The supplied screws need to be better or just replace the bolt/screw 'reciever nuts'. It does take a bit to connect but you can do it. Just be patient. The lights, reverse and brave, are nice and bright. The dark lens gives my truck a very modern appearance. Get it and be cool like me!!
R**L
Perfect Fit!!
This was a perfect fit for out Honda CRV. After watching a YouTube video it took us about 15 minutes to install. Highly recommend!!!
J**Y
Looks decent from behind, but not up close
I bought this because my factory light had begun to turn brown from water getting past the gasket. I saw this same one on someone else’s f150 and decided to buy it. There’s a difference though. Her truck was black. Mine is white. The issue of fitment is much more pronounced on my truck than on hers.So let’s get this out of the way. It doesn’t fit properly against the roof of the truck. At least the top of it. There’s a gap. The gasket properly fills that gap so there’s no leaks, even through an automatic car wash, but since mine is a single cab 2 wheel drive, it’s noticeable to me. If it were a lifted 4x4 I wouldn’t notice it.The brake light itself, I don’t know how bright it really is during use, I can only see what it looks like on my security cameras as I’m leaving my house, and it looks decent. I will say I was rear ended last week. I can neither confirm nor deny that this was the culprit.The cargo lamp sucks. Its useless. I have an 8’ bed, and it shines only on the last two feet of the bed. If I had a 6’ bed it would miss the bed completely. It plugs into one of the cargo lamp plug sockets so here’s another issue with it, it stays dimly lit for a few minutes after the cargo lamp turns off. I don’t know why.Another issue, the provided bolts. Don’t use them. They won’t work. You’ll have to use your factory bolts. It took me probably half an hour to get one of the bolts out of this light because they were secured in there with nuts for some reason, and it would not thread out for the longest time. After working it over and over eventually it rethreaded itself and was able to come out. Irritating.Long story short, when I get around to it I’ll be buying a replacement, but it won’t be this one.
D**R
Good Upgrade
Nice upgrade/repair. As others have said, the stock light leaks and looks ugly dirty. This is brighter and I like the look better. Also, as others have said, it doesn't sit flush. It looks fine, though. It has a good seal. Easy to install. Just unplug the existing bulbs and plug in the right and center (as you are facing the light) plugs. The third, unnecessary plug screws in a non functional hole and all is neat and tidy. Nice part that doesn't cost the $70 that the stock part costs.
A**1
quick install and thick foam to keep water out
I had a leaking rear third light on my 2012 ford f-150 which caused water in my roof and looked at replacing the gasket, but this unit was about the same price and I'm glad that I did!Was a very quick install (Used the factory screws from old light since they were longer).Reverse/Cargo light is much brighter than the factory which is nice for working in the bed at night.Will update if there's any water leaks...
Trustpilot
1 day ago
5 days ago