VEVOR 28 Inch Adjustable Furniture Legs, Square Reinforced Steel Office Table Legs Set of 2 for DIY, Max Load 1000 lbs Heavy Duty Desk Legs, Quick Instalation & Rich Accessories Legs Black

These were super easy to install! They came packaged nicely to protect the coating! The legs were individually wrapped in plastic inside the box to avoid scratches. They come with adjustable little knobs that screw into the base if you need to level the table, but you don't have to use them. They have held up really well so far for almost a year (in an industrial setting for training tables) and are easy to wipe clean! The color has not changed and haven't had any scratches yet.Also has pre-drilled holes that make it easy to mark and drill.It did not come with screws for the table base (you'll need a table base separately), which makes sense because the screw length would depend on the table top depth. It would be helpful, though, if they told you the gauge of screw you'd need. I did have to buy several different packages to see what would fit. I ended up using 6' butcher block table tops that we got on clearance at Home Depot for $30 each!I did use a drill to pre-drill my holes into the base, and would recommend that! Again the legs have holes pre-drilled for you, so it works as a really nice guide for your table top!Would recommend 5/5!

I was setting up a table over my dog crate with 3/4 inch plywood. These legs worked great. It is very stable and fits perfectly over the crate. It was hard to find the table size I needed. So, I opted on making one myself. The screws that came with these legs were longer than what I needed for the plywood. So, I ordered #8 x 5/8" (15.87mm) Deep Coarse Thread Phillips Pan Head Black Phosphate Wood Screws. These fit perfectly without penetrating the plywood. The weight limit for my table will be limited by the plywood and not by the legs. They could have handled a thicker top. But, I wanted to keep my table light weight. I have just what I wanted at this point.

These are nice and sturdy with super hardware (adjustable feet). Everything from Vevor is always top notch

Baught for butcher block table in dining room. Super easy to make a non laminate table this way. Very sleek looking. Seems sturdy.

Super sturdy legs worked great with my table i had made

Very sturdy

These legs will very likely break at some point. The adjustable feet are screwed into plastic plugs inserted into the bottom of the legs. The plugs aren't fixed to the legs in any way, they're just pressed in and retained by friction and a fragile plastic cap. If you put too much weight on the table, the plastic plug will push up into the leg and the leg will slide down onto the foot. This essentially makes the leg too short and impossible to adjust.One of the legs I bought failed in the way described above. I put construction adhesive on the plug and scored the inside of the leg to give the adhesive something to grip onto. After letting it set, I turned the table upright and it immediately failed again. Thinking it was a fluke, I just bought a new set of legs because they're so cheap. By the time the second set arrived, another of the original legs had failed in the same way. Now, I'm going to drill a hole and insert a screw above the plug in all of the legs so that they can't push in. This will fix the problem, but it'll be a pain and an eyesore.As usual, there's a reason this product is so cheap. Commercial legs in this style are made with a metal cap at the bottom of the leg with a hole drilled into it and a nut welded over the hole for the lugs on the adjustable feet to screw into. That design could withstand any practical amount of weight without failing, but it's probably more complicated to produce.If you just want these for casual use, they'll probably be fine. But they're also a little tricky to install perfectly on the corners of your table, so, unless you're a fairly handy person, I would be cautious in any case. I would not buy these again.

The table legs are fine and arrived in a timely manner.The problem is there were only 3 feet instead of 4.After sales support couldn't seem to understand the issue, I ordered a set of four,4 Set M10 Swivel Adjustable Leveling Feet,Overall I like the legs.