MINISFORUM MS-01 Mini Workstation Core i9-13900H 32GB RAM 1TB SSD Mini PC, HDMI+2X USB4 8K Display, 2x10G SFP+ Port, 2x2.5G LAN Port, Support M.2 2280/22110/U.2 SSD/RTX 3050 Graphics Cards

My personal laptop died in late November of 2024 so I decided to replace it with the MS-01. I ordered the Core i9-13900H (32+1T) but in reflection should have ordered the Core i9-13900H (0+0) because I used the 1T NVMe from my dead laptop and ordered the 96GB upgrade kit (Crucial RAM 96GB Kit (2x48GB) DDR5 5600MHz (or 5200MHz or 4800MHz) Laptop Memory CT2K48G56C46S5) which will arrive after this review. To begin the packaging this comes in is very nice and the padding is almost 2 inches thick making it very ship worthy. Access to the BIOS which is very clean and easy to use is accessed by hitting the DEL key when the Minis Forum logo appears. This unit recognized and booted effortlessly from the NVMe that was in my laptop. I examined the boot drive that came with my MS-01 and all drivers were loaded but downloading the Windows 11 drivers from the Minis Forums sites is a bit challenging but once you find the drivers they are all in one RAR file. The MS-01 is very quiet, sleeps well and wakes up easily. Under heavy load the fan is noticeable but not to the point of being obnoxious. I purchased this primarily for the dual NIC cards and the (3) NVMe slots as well as the (2) Type C ports and once the drivers are installed, they work flawlessly. The build in GPU is running a pair of LG Ultrawide monitors at 2560x1080 each and while the resolution is not quite as crisp as I hoped, it is still very clear and I suspect higher quality type C cables may help this. Screwless entry to open the case is great but there is one design flaw that I have found. One cannot access the button that opens the case with the CAT5e cables in place and one cannot access the locking clips that hold the CAT5e cables in place due to the case design. To remove the CAT5e cables one must use a tiny screwdriver to press down on the locking clips. I spent a few hours researching GPU’s that would fit in this case and the options are few, especially of you are not comfortable tearing down a GPU and installing a custom GPU Cooler. Overall I am very impressed with the unit.

The MS-01 is a great, full features solution for running Proxmox. It small, quiet, has plenty of CPU power and connectivity. The PCIe slot is a little awkward to deal with, but that is really nit-picking. Super happy with the purchase.

Solid, stable, with IPMI. I built a few 10Gbit fiber routers with these. Running 24x7 for months without thermal issues or stability issues.

The build quality of this mini-pc is great. It is very powerful to support 96G DDR5 memory and 4 M.2 SSD in addition to 2x 2.5G port and 2x 10G ports. This could be used as a proxmox node to host RKE2. The only issue might be heating but vendor confirmed that it is not to be worries about.

I've been using this system for about a month now, and I'm really pleased with its performance. It replaced an older tower-case system as my main workstation. Once it's up and running, the system operates smoothly and handles demanding tasks without a hitch. I decided to max out the RAM and install fast SSDs, which has given the machine an impressive boost. While I opted not to use a dedicated graphics card—resulting in slightly lower benchmark scores—the unit still dominates in everyday performance.The setup process was generally straightforward. The most challenging part was realigning the fans on the underside after installing the SSDs—a task that required a bit of patience but was ultimately manageable. I did run into an issue early on, having to return my first batch of SSDs because their attached heatsinks prevented a proper fit. Fortunately, I found a suitable alternative without those extra components.One minor caveat involves a switch on the mainboard that needs to be set correctly depending on whether NVMe SSDs are being used. The English instructions in the online manual weren't very clear on this point, which led to a bit of confusion at first. Once I figured out the correct setting, everything fell into place.

This is a good machine, for a solid price and a nice design. It works well as a home server.First issue I ran into was while the machine has been off for some time as I was moving. The machine would not turn back on. I did get link lights on the back of the machine, but the power button did nothing. I only got the machine running back again by following some recommended steps on reddit saying to disconnect the CMOS battery (left it out for about 30 minutes or so). Then the machine was able to finally boot. But obviously the BIOS settings were lost.I did reach out to minisforum support and received a response right away offering a replacement for a barebones version. I did not take it as I did manage to get the computer to start back up, but followed up with a question regarding any known issues with the device or maybe an issue with the BIOS eating up the CMOS battery while the computer is off. I have not heard back on that yet.I wish I could give this machine 2 more stars as it is great, but this issue makes it less reliable.

⭐⭐⭐⭐⭐Awesome machine over all⭐ Because it DOES NOT have room for a 3050 (like it says in the product description)Ordered 3 and they've been great but the product description is highly missleadeding with the RTX 3050