3 Pack Blink Camera No Drill No Screws Wall Mount Bracket for Blink Mini /Mini 2 /Blink Outdoor 4 /Blink Indoor Camera, HBV Adhesive Mount

I got this Blink wireless cam for my part of my house that needed coverage.(Plus, it was on sale! Thank you, Amazon!)I now have four Blink wireless security camsexactly like this, all protecting me and my house.There are not enough words in any language to express how these cameras have saved my life and lifestyle. They have given me complete and total peace of mind.These wireless cams are so so so easy.Yes, I have to replace batteries once in awhile. Not a problem. However, I simply position each camera where it is easy for me to get up and bring it down.I have, of course, my membership with Amazon Blink. This gives me a nice cloud service - an app - and 24/7 monitoring. Anyway, so yes, sometimes I have to change batteries. This gives me a chance to clean the unit - dust it off - and polish the lens anyway.The batteries last me for a few months.My cams are armed 24/7.One impressive feature about these wireless cams is the body style and material. I live in an incredibly volatile weather area of the US. Horrific weather patterns. Cold. Extremely hot. Super sturdy.Yes, these cams have a limit as to temp tolerance. But I have never had a problem even in extreme heat and cold.It takes me (start to finish) about 3 minutes to bring the camera down - pop in new batteries - clean and dust it off- and put it back up.Recently, a security company solicited me for off site remote surveillance. They gave me an estimate of $7,000 for the cam install. Plus, monthly fees.I just laughed.These wireless Blink cams offer me 24/7 monitoring. And they're simple to use.Plus, I'm in control. Nobody else.Yes, these are motion activated only.Exactly perfect for my property.Needless to say, I highly recommend!Once again, thank you Amazon for offering a SUPREME home security system and host service!

Works well

It was easy to assemble and the quality of the video is great.

Of all the third-party Blink camera mounts available, this design is perhaps the simplest and most elegant. Rather than completely replacing the mount that was supplied with the Blink camera, this model has a slot which accepts the base of the standard mount, essentially like a pocket. The mount can easily be slid out of the holder if you need to change the camera’s battery or clean the lens.Unfortunately, and as others have already mentioned, the adhesive on these mounts does not seem to hold up in hot weather, which is certainly an issue for outdoors installations. It appears that the adhesive being used is not 3M VHB but rather a much poorer-performing knock-off.A permanent installation on a wall, etc. can be achieved by completely peeling off the adhesive from the backside of the mount and then affixing the mount using epoxy glue. I used J-B KwikWeld Quick Setting Steel Reinforced Epoxy (available on Amazon as well as most home improvement retail stores), securing the mount in position using painter’s tape while the glue cured overnight. The tape was then removed and the mount was ready for use.Also note that the base of the original camera mount may not fit firmly into the pocket and can slide around slightly. To create a snug fit, I cut and trimmed the lid from a plastic soup container to make a thin flexible plastic spacer. I placed this into the pocket as a backing before inserting the original camera mount base, and the loose fit problem was solved.In summary, if you need a reasonable Blink camera mount and are willing to take on a minor DIY project with epoxy glue for a durable outdoor installation, this product fits the bill.

The stick very well to my outdoor surface. I highly recommend them for anyone not wanting to drill holes in their walls.

I purchased this product (KMOUANTS – 3-pack adhesive mounts for Blink cameras) a couple of weeks ago, and I only got around to using it for the first time yesterday at around 5 PM. I installed the mount following the instructions, and at first, everything seemed fine. I should mention that the camera I used was brand new, straight out of the box.The mount came with a sticker on the back that seemed to have strong adhesive, so I trusted it and placed the camera where I needed it. However, not even 7 hours later—around midnight—I heard a loud noise. To my surprise and frustration, I discovered that the mount had detached from the wall, and the camera had fallen.The impact was so severe that the lens broke, and the camera stopped working completely. I find it unacceptable that due to the poor quality of this adhesive mount, a brand-new camera was destroyed. After checking other reviews, I see I’m not the only one who has experienced this problem.I demand that the company take full responsibility for the damage to my camera, as this is clearly a recurring issue with this product. Selling a mount that cannot reliably hold the camera in place is unacceptable, and customers should not have to bear the cost of damage caused by a defective design.

these are great as long as the surface is clean and smooth. The swivel mount fits right into them for easy mounting and removing the camera itself to change batteries. Great don't worry get them.

What a great product!!!! Went up easy.. steering hold!