MUSETEXATX PC Case, 360MM RAD Support, 3 x 120mm Non-ARGB Fans Pre-Installed, 270° Full View Tempered Glass Gaming PC Case with Type-C, Mid Tower ATX Computer Case, White, Y6

As someone new to PC building, I found the MUSETEX ATX PC Case to be a fantastic choice.​Pros:-Aesthetically Pleasing: The tempered glass panels provide a clear view of the internal components, and the overall design is sleek and modern.​-Spacious Interior: There's ample room to work with, making the installation of components straightforward.​-Pre-Installed Fans: The case comes with multiple pre-installed fans, which is a great bonus for beginners.​-Cable Management: The case offers decent options for cable routing, helping to keep the build tidy.​Cons:-Instructions: The included manual could be more detailed. As a beginner, I had to refer to online resources for certain steps.​-Fan Control: While the fans are pre-installed, controlling their speed and lighting requires additional setup, which might be a bit challenging for first-timers.​Overall: This case offers great value for its price, especially for those new to PC building. With a bit of research and patience, it's a solid foundation for a custom build.​

Love this case it’s wider than tall has room to add more fans as you please 6 more to be exact love the panel because it has 2 USB 1 USBC and an auto restart button including a headphone jack it’s roomy inside as well so good air flow, and just very aesthetic my vision was an all white build and this case definitely made it more clean and appealing for me. Has plenty of screws it’s quiet as well you can hear that its on but it’s quiet like a low hum in the background which I’m perfectly fine with overall the build quality is solid if you’re contemplating it I would look at the other white cases to compare as I did but as you can see I decided on this one in the end and very happy with the decision.Oh and the case design I really loved for cable management it came with 3 Velcro strips and a pack of clear zip ties so I was able to organize the cables easily

Beautifully built, but scary to open the first time. There is pull tab on one corner of the glass door, and trying to open it made me think I would break the glass. There are spring-held posts at the top the glass, instead of screws, concealed from view. Wiggle slightly while pulling, and first the one by the tab, then one by one the others will release the posts held into holes atop the glass/box interface at the top. The top will open, hinging at the bottom, NOT at the side. Don't try to open it hinging it at the side or you will break it. Then lift the glass upward from the case to release the bottom edge. Instructions, unclear, lead one to think lots of people break the glass doors. They are trying to hinge it from the rear instead of the bottom edge. It isn't easy to see how if you don't know. There are ugly labels that appear to be stuck on the glass, that can't be removed, or so it seems. But careful inspection at the edges of the glass reveals a plastic protection film on the glass that peels off, and the labels come right off with it. Air flows through the bottom and top and all sides of the box. It's the most airy computer case I've ever built a computer with. I thought there might be a problem with wiring, but found that the standard length cables supplied with power supplies are plenty long enough and everything installed easily. Provisions for tying cables are well provided all over, so one can make a neat and beautiful installation easily without a mess of tangled cables.I really like that I can remove the front panel as well as the side door, for more room for big or fat hands to get in there, but after the build it can be difficult to replace the front glass because its screwed, and some screws are hard to reach with stuff inside. What I didn't like: The motherboard goes all the way to the floor of the case. If there ever is a metallic object that hits the bottom of the case inside, like a dropped tool or screw, it can bounce toward the motherboard and contact electrically conductive soldered spots right near the bottom edge. There are a lot of them on my MSI motherboard. Even just a half inch clearance from the bottom would feel a lot safer.

I considered giving this 3 stars, but for the price it’s passable for 4. The case itself is beautiful and the overall design is functional. The wire tuck ability is there if you take the time. There is a single HDD/SSD bay above the PSU slot.Major con with this is the extremely terrible hardware included. The standoffs that are pre-installed won’t even accept the standard screw or any of the screws that were sent in the box. I had to plier out the standoffs and reinstall my own brass standoffs and use my own screws. I have built 50+ computers in my career and have never seen standoffs and hardware so bad. I was lucky to have extra hardware to replace what was given. For the money this is a pretty nice case, especially if you can get a deal on it.

Where to begin... This case is awesome. Super easy to put your build together, snap in magnetic sides, heavy case, lots of airflow for cooling, the fans pre installed are super quiet, just overall worth every penny I paid. I would buy this again in a heartbeat. Also this setup allows for easy wire hiding and a clean look

After needing an upgrade to my pc case I looked for a while and settled with this case. Fit all my components perfectly with no need to change anything with the case. Great airflow and the makes my pc look great!! Highly recommend

Clean case, bought to work with my liquid cooler. Quiet, nice looking case. Great price for the quality.

Easy case to work in with lots of radiator cooling options. Looks expensive and can fit a full size power supply unlike Lian Li dynamic case.Mother board is positioned lower so you can easy put a 360 radiator up top and not interfere with the pins on the top of the motherboard.