9.4x9.4 FT Outdoor Storage Shed, Garden Shed with Updated Frame Structure and Lockable Doors, Metal Tool Sheds for Backyard Garden Patio Lawn, GreyRecycled Claim Standard 100

I used this to house my portable generator, which I use as a backup power source for my home. I installed two hatches—one for exhaust and one for intake air—and it worked perfectly. The key is to take your time during the setup process and lay out every part before you start assembly. Planning ahead makes everything go much smoother.

It is a very cheap option. You will have to Frankenstein some stuff.You have to bend the flimsy frame to get the holes in the right place.Definitely not rain proof. The door frame has already rusted in less than 3 months. Instructions weren't clear so the door notch was slightly offset. It does matter which way the top bar is put together. Recommend squaring door and lining up notch, otherwise you'll have to take it completely apart or cut it.Get a giant tarp to drape over it to keep rain from getting in through eves and sides.Also save yourself some trouble and pre-do all your washer assembly. They are plastic washers, btw. If I do this again I'll get a bag of o-rings. The plastic washers slip off so easy.Icing on the cake - the roof panels are all supposed to be the same size, but the 4 corner pieces the w15s were 3 5" shorter than the w12s.Also when putting the door together, the instructions are hard to read and holes definitely did not line up even when we did it a second time. They wanted the washers on the inside, we did it opposite cause that just doesn't make sense.You get what you pay for, but seriously only recommend for dry climates. Def not good for snow or wind. Flimsy. Many panels came bent. And the roof cap is very very thin.Would be a great patience trying challenge shed for like a building competition. Ikea furniture is about 50% easier to build than this posGot to replace storage, but definitely do not feel comfortable storing anything of value in it through the rainy season.

The media could not be loaded. The reviews will show you who’s use to manual labor and doing things themselves!!! Who knows not to compare high quality items to lessor quality items!!! With that said this shed SO FAR lives up to its purpose of being a shed!!!I took my time with this shed because:1. I wanted to do it myself!2. Make sure to get it done correctly!3. There was no need to rush!!!!!I took 1 day to peel all the plastic off ALLLLLL PIECES and separated them by type (my pieces were labeled correctly). That night I separated all the washers (check photos) and screws put them in bowls and marked them with tape to identify! Not necessary but definitely helped me work smarter NOT harder!! When I finally got around to building the shed I made sure to read the instructions very carefully making sure to look at photos to see exactly which way the panels went! Also they have a video on the 2nd slide of product page that is great for clarification on how to put together if you don’t have common sense to follow instructions!!!Some people complained about it being flimsy… WHY NOT JUST SEND IT BACK!!!!Some complained about holes NOT lining up… most likely you either had the panel turned the wrong way or didn’t straighten it out or lacked common sense!!Some even stated they didn’t have enough screws or washers… I legit had extras of all hardware!!!! And YES I PUT IT TOGETHER CORRECTLY (check out the video)!!!Please remember when paying YOUR MONEY for merchandise… you ALWAYS have the option to return it and purchase elsewhere!!! The cop out of the hassle is reboxing up the items is sad and proves you don’t value your own money!!Let’s see how it holds up in the rain… I’ll update as needed!!!

Directions are incorrect, shed was halfway build and had to take it back apart due to the instructions not being correct and the holes in the poles were drilled in the wrong location to line up with the roofing metal, so I had to drill my own holes into the frame. Instructions are also unclear of which direction certain parts go, and lack instructions for the center braces as well. A 1 day project took 4 days because of having to disassemble it half way through after realizing that the alignment was off due to following the instructions. Each metal piece was also wrapped with plastic which was completely unnecessary and time consuming to remove each piece before being able to build, i understand the concept of preventing scratches but it prevented nothing as ours was scrapped up pretty badly even with the plastic which just made it harder to remove. Very happy with the size and the quality, but the instructions need improvement as does the protective plastic.

This product comes in 2 boxes, assembly is easy but you have to pay close attention to the location of the base where you will put the panels, the gaps must match those of the panels to ensure that they do not fly away in strong winds, in my order 2 front panels were missing but that same day I contacted the seller through Amazon and they answered me instantly and after 5 days the panels arrived without problem. In general, for the price, I see a good product that can solve your problem, I still need to see how it holds up in the snow and in climates with a lot of winds, I will do an update if necessary.

Easy to put together. Very durable and just enough storage i needed.

For the most part the holes lined up and went together well. Took 2 of us maybe 6 hours to assemble. It’s pretty sturdy for the price and came without scratches or dents. My biggest complaint is it said the doors was 55” wide when it was actually 45” wide so my mower doesn’t fit in it (the whole reason I bought the shed)

it's durable sturdy holds a lot. It's bigger than what we thought it would be. It's very nice and we're thinking about getting another one.