Instant Smile MULTISHADE Patented Temporary Tooth Repair Kit. A Realistic Looking Fix for a Missing or Broken Tooth.

I couldn’t believe it when I took them out of the box and held them up over my own teeth. They’re the EXACT size for my teeth/mouth. I’m using them as veneers, so I have equipment to file them thinner so they can be affixed over my existing teeth, plus one will serve as a cover over a temporary crown I made from acrylic with a metal post where I am actually missing a tooth (the real temporary crown from the dentist fell out, post and all, so I replaced it myself rather than spend all that money again before I even pay for the real crown). I’m using the same equipment I used to make the temporary crown, which is just nail salon equipment meant for acrylic nails, and so far it’s working great. I have an electric file with interchangeable heads, manual files, acrylic powder and bonding solution (in case I have to create any more permanent structures than can be fashioned from the thermal polymer beads that came with the Instant Smile kit itself), the tools from the Instant Smile kit itself (polymer beads, cuticle scissors, manual file), and an extra 6 oz bag of polymer beads. I do not recommend using acrylic yourself as the ingredients are toxic and can be swallowed, inhaled, or become stuck to structures you did not intend. Additionally, even after the structures have been created successfully, you could swallow them while going about your normal day. I just wanted to make it clear that my success with this product was due to additional factors as well as the good luck to have just the right size teeth. But if you have a small mouth or just need to cover up a missing tooth here or there, this should definitely work for you. It may take a few tries with the polymer beads, but keep going until you get a secure fit. Once you’ve allowed the polymer to set completely, you should be able to remove the structure and replace it without much difficulty. If it’s fitted correctly, your new fake tooth should “snap” into place when you put it back in. Do not wear any fake teeth or any artificial structures created with the polymer beads overnight. Ideally, you should remove them while eating, but if you choose not to you should make sure they are in place before you swallow each mouthful of food. Seriously, every single time just feel for the structure with your tongue to be safe. Good luck!!

Tried multiple times to use after thoroughly reading directions. Hard to place in proper spot and when try to remove fingers from the tooth after "spreading" wax on connecting teeth for holding, the waxy substance sticks to fingers and pulls "tooth" out of place. Purchased because had a missing tooth & was in a wedding and wanted to fill that space because of photos being taken. Unfortunately that DID NOT happen. Totally disappointed in product. Total waste of money. Wish it was never been suggested to me to use . Only created more problems. I wish I could return and get my money back.

Not any good

Not sure where the adhesion is, wasn't in package. The plastic balls are ok. The actual teeth though are so thick you cannot put over a tooth front to cap or cover a chip, so not sure where or how that can be used???? Useless for my needs but maybe I was doing something wrong???...to put in front of a tooth with chip would make the entire tooth stick way out front...maybe you are supposed to sand inside to hollow it out?...it's thick...but I'm not foolproof so maybe there were instructions I didn't follow but if there were I couldn't find them. Maybe they are not for chipped coverage?...just not sure.

The glue gel does not work at all, I've tryed using a lot of it, anda little, then tryed a medium amount, doesn't matter cause it doesn't stick at all, not only that but the replacement teeth are un realistic as far as the sizes, had to cut and file down the tooth needed, then after hours of sizing it, the glue didn't work, so don't waste your money on a rip off product, thanks for wasting my money.

This is great to use until you can get your tooth replaced with something permanent. I broke my front tooth at the gum line and had to have it removed 4 days before going on vacation in Europe. I was able to get this from Amazon with the 2 day shipping, leaving me a day to play around with it to try to get a good fit. I watched a couple of videos to get an idea of how to form them. It took me several attempts, but I finally got two formed that snapped into the open space. It is tricky to get the right fit on the roof of the mouth, but the beads are easily heated and reheated until you get something you're comfortable with. The color choices were great and I was able to use 2, as one was slightly lighter and the other slightly darker than my natural tooth color. They look pretty good, and unless someone is right in front of you staring at your teeth, no one can tell it is anything but a natural tooth.

Doesn't work I'd like a refund

I 100% can not understand why anyone gave his product a bad review. After my partial broke the dentist said it would be weeks to have it repaired if they could at all. I found these and may not bother with another partial. It does however take a couple tries to get them in correctly but given the molded plastic is reusable it's no problem. These look and fit better than anything I've ever had. It's great that you get extra teeth. I went ahead ND made a second set so as to always have them on hand. I eat and chew gum with no movement or sticking to the material. They do not impede my speech in any way. Only thing you can't do is drink or eat anything hot with them in. They will soften. In my case it's not an issue. Plus cutting back on coffee isn't a bad thing. If you take your time and don't use to much of the backing on the tooth you'll love these. I looked up videos to see how much to apply and it was not difficult from there. Made me laugh when I saw questions about them being stuck in mouth. Psst.... drink something hot. They'll come right out. Want them to set faster. Drink some cold water. Simple with a great result. I would highly recommend this product.

Nul, ne fonctionne pas.

Ottimo prodotto, materiale robusto nella masticazione.

Lo compré para mi suegra,pérdida de dinero ,no vale la pena

J'ai essayé plusieurs fois sans y arriver. Avant d'émettre un avis, je vais réessayer. Livraison rapide

I've had a tooth missing for a couple of years now and have decided to get all four of my front ones sorted. Unfortunately the prep work means I will have two gaps for two weeks, until my new bridges and crowns are fitted. I was worried about my appearance so had a quick Google to see if there was anything temporary I could use for that two weeks and stumbled across this product so thought for the price it was worth a go. I really wasn't expecting much but I am seriously impressed with it! It all worked as it should and I've ended up with a tooth that clips in and out as needed. Ok, so you can't eat with it in and I certainly won't risk sleeping with it in but for day to day use just to fill the gap and make me look a tad more presentable it's absolutely fine. The thermal beads stick to the plastic tooth like the proverbial to a blanket but don't adhere to your own teeth. You just mould the blob to fit, push the tooth into place, push the moulten blob around to get it into the gaps and once it's hardened (which takes ages, by the way), the tooth can then be clipped and unclipped and feels surprisingly secure when it's in. The good thing is if you mess it up, just pop the tooth back in hot water and once it's sufficiently softened you can have another go. The worst thing for me was having to use the bonus (not shown in the packaging) "extra dark shade for badly stained teeth"! Don't expect this to be anything remotely permanent, it's not. It's just something that's easy to use to hide a gap.