Q: The turns seem inconsistent. Is it defective?

No. The winder uses programmed rest cycles, not continuous spinning. This protects your watch’s movement. Fully wind your watch before placing it to ensure it has enough initial power.

Q: Is this watch winder anti‑magnetic?

No,This winder is not anti-magnetic and isn't recommended for watches sensitive to magnetic fields. If your mechanical or quartz watch is magnetically sensitive, please use a different winder.

Q: Does this need to stay plugged in? Is there a battery?

Yes, it must stay plugged in. There is no built-in battery and no rechargeable function. Required power is 3V-9V, 0.5A. A connection cable is included, but a power adapter is NOT included.

Q: The winder will not rotate at all. What should I check first?

Check the gear adjustment switch on the back of the unit. If it is in the OFF position the winder will not operate. Move it to Gear B or Gear L, then confirm the power cord is fully connected.

Q: What size watch will fit in this winder?

Dial diameter under 47mm, case thickness under 28mm, strap circumference 175-195mm. It cannot hold two 58mm dial watches at the same time. Please measure your watch before purchasing.

Q: Will this work with a quartz or solar watch?

No. This winder is for AUTOMATIC (self-winding) mechanical watches only. It is not suitable for Quartz, Seiko Kinetic, or Citizen Eco-Drive watches, which do not wind through motion.

Q: What is the TPD of this winder?

This winder operates at 970-2430 TPD (Turns Per Day). Please check your watch's own instruction manual for its required TPD and rotation direction, then select Mode B or Mode L accordingly.

Question 1

Why does my watch winder stop sometimes? Is it defective?

Accepted Answer

No. The winder uses intermittent rotation (e.g., 6–18 min pauses) to mimic wrist movement and prevent overwinding. These stops are intentional, not a defect.

Question 2

My watch stops even in the winder. What should I do?

Accepted Answer

Manually wind your watch 20–40 times before placing it, and fully wind it once a week. The winder is an auxiliary tool, not a replacement for wearing or initial power.

Question 3

Why does one watch stop in the winder but the other works?

Accepted Answer

Fully wind both watches manually first. Also check the stopped watch’s size (dial <47mm, thickness <28mm). Oversized or heavy watches may not sit properly on the mechanism.

Question 4

The turns seem inconsistent. Is it defective?

Accepted Answer

No. The winder uses programmed rest cycles, not continuous spinning. This protects your watch’s movement. Fully wind your watch before placing it to ensure it has enough initial power.

Question 5

Is this watch winder anti‑magnetic?

Accepted Answer

No,This winder is not anti-magnetic and isn't recommended for watches sensitive to magnetic fields. If your mechanical or quartz watch is magnetically sensitive, please use a different winder.

Question 6

Does this need to stay plugged in? Is there a battery?

Accepted Answer

Yes, it must stay plugged in. There is no built-in battery and no rechargeable function. Required power is 3V-9V, 0.5A. A connection cable is included, but a power adapter is NOT included.

Question 7

The winder will not rotate at all. What should I check first?

Accepted Answer

Check the gear adjustment switch on the back of the unit. If it is in the OFF position the winder will not operate. Move it to Gear B or Gear L, then confirm the power cord is fully connected.

Question 8

What size watch will fit in this winder?

Accepted Answer

Dial diameter under 47mm, case thickness under 28mm, strap circumference 175-195mm. It cannot hold two 58mm dial watches at the same time. Please measure your watch before purchasing.

Question 9

Will this work with a quartz or solar watch?

Accepted Answer

No. This winder is for AUTOMATIC (self-winding) mechanical watches only. It is not suitable for Quartz, Seiko Kinetic, or Citizen Eco-Drive watches, which do not wind through motion.

Question 10

What is the TPD of this winder?

Accepted Answer

This winder operates at 970-2430 TPD (Turns Per Day). Please check your watch's own instruction manual for its required TPD and rotation direction, then select Mode B or Mode L accordingly.

ASIN	B0BG8LPKJJ
Additional Features	Adjustable
Best Sellers Rank	#15,254 in Clothing, Shoes & Jewelry ( See Top 100 in Clothing, Shoes & Jewelry ) #1 in Watch Winders
Brand	Mcbazel
Brand Name	Mcbazel
Closure Type	Buckle
Color	Black PU Leather
Customer Reviews	4.2 out of 5 stars 1,700 Reviews
Finish Types	Unfinished
Inner Material	Velvet
Item Dimensions D x W x H	9.7"D x 6.5"W x 7.4"H
Item Type Name	Dual Watch Winder
Item Weight	1.09 kg
Jewelry Storage Type	Jewelry Box
Manufacturer	Mcbazel
Manufacturer Part Number	MT-wc-010037
Material	Faux Leather , Plastic
Material Type	Faux Leather, Plastic
Model Number	MT-wc-010039
Mounting Type	Table Top
Number of Compartments	1
Number of Items	1
Occasion Type	Birthday, Engagement, Mother's Day, Wedding
Recommended Uses For Product	Bracelet, Watch
Shape	Square
Special Feature	Adjustable
Style	Modern
Style Name	Modern
Target Audience	Men

Watch Winder for Automatic Watches, Double Automatic Watch Winder Box with Quiet Japan-made Motor, Automatic Watch Display Storage Rotation Wristwatch Box with 2 Slots (Black PU Leather)

Details

Details

Description

Specifications

Common Questions