ONETWOFIT Foldable Power Tower Pull Up Bar Station Assistive Trainer Multi-Function Adjustable Dip Station for Home Gym Workout, Heavy Duty Strength Training Fitness Equipment Pull Up Stand

I've had this pull up machine for almost a month and I love it! It does the job and a great addition to my home gym. Assembly was easy and doesn't take up too much space. I mainly use it for pull ups and dips only using 2-3 bands on each side to get a full range of motion and a great workout. Its also very stable and sturdy.Tips: during assembly I ran into an issue with the foot peg (3rd pic) the bottom holes aligned but not the top. So easy fix is use a drill with a metal bit and drill the hole through to make it bigger and allow the screws to be installed. Problem solved.The white rollers are probably the one thing people complain about because they break easy. This is due to the impact of the knee pad going up too fast and slamming against the metal rest. You have to be careful and instead guide your knee up as the pad goes up and rest it easy on the metal vs jumping or hopping off abruptly.Customer service is awesome! I told them about the broken rollers and sent me new ones right away with spares! Repair is super easy (3rd pic) just make sure to unhook all the bands and the hook clip on the side, guide the knee pad all the way down and perform the repair this takes under a minute. Also don't tighten too tight so the pad can move freely up and down after repairing.This is a great machine for the price. I highly recommend it for anyone wanting to do assisted pull ups and dips and build strength!

Note: Be extremely careful and safe when using this machine. Follow the instructions and triple check that everything is secured. Last thing you want is the telescopic frame folding on you or the entire apparatus falling over while you're using it.I'm trying to get in better shape and chin ups are one of the basic, fundamental exercises. Most people cannot do even 1 yet is vital for personal fitness and well-being just like the push-up.A standard pull up bar is cheap and secured but I live in a condo and am not allowed to drill into walls. I first started with a pull up bar that affixes on the door frame. I started to make progress but after a couple weeks I noticed that the top of the door frame was starting to tear. I immediately ceased using the bar and promptly got rid of it.I scoured Amazon and came across many different products. I needed something that I could fold after use as I am quite limited in space but also economically justified. After careful research, I came across the Onetwofit Power Pull Up Bar Station. It was one of a kind. It looked sturdy and is compact once folded. For the price and its function it can't be beat and at the time of writing comes with a coupon which drastically lowers the price.The dimensions of the box is approximately 51x9x13 and, according to Amazon product page, weighs about 50-60 lbs give or take. It didn't feel that heavy to me but it could be just me. Definitely get assistance when lifting the box if this is heavy/too tall for you. The contents were very compact and secured with no room for movement.At its lowest I measured 49" (4 feet) and fully extended to max height I measured 86.5" (7'2"). When folded completely the base is 9x10. This is really compact and you could fit this in the trunk or back seat of many sedans. I store it under my TV but you can put it almost anywhere. The product is advertised as being able to hold up to 400 lbs. I'm 250 lbs and it never shook nor moved while using it. I didn't hear any creaking neither. The angled, H shaped base provides great stability to the frame and prevents the frame from tipping sideways when used properly. DO NOT USE any pull-up assistance cords/ropes or any other contraptions; you will fall and get injured.Be sure to triple check that all quick release handles are locked properly as well as the guide pins, reset pins, adjustment knobs and torx knobs are secured. Failing to verify that the frame and rod is secured can lead to great injury.I did have an issue that I contacted Onetwofit customer service and it was quickly and professionally resolved. If you ever have a issue with their product, contact them first. They are prompt and eager to help solve your issues.The instructions are pretty self explanatory. However, there is room for confusion in several steps that it took me some time to figure out, partly due to me just staring at the pictures.1. The quick-release handle may not lock and have tension as it should. This is due to the screw of the handle itself not screwed in to the appropriate depth. All you need to do is rotate the quick release have (remember its actually a long screw) to the right (Lefty loosey, Rightey tighty) to reduce the length of the screw and allow the quick-release to lock. Don't reduce the length too much for if this happens there will be too much tension that you won't be able to lock it (or cause damage to the washers). I have a feeling that during shipment it may have gotten loose.Refer to attached pictures in this review.2. In Step 3 and 4 on the instruction manual, put on the protective cloth WHILE the main frame is still loose. Do not lock the main frame and try to put the cloth on; there will be far too much tension and you can injure yourself. 3. In Step 6, arm rests come with stickers on to tell you which is left and which is right. Match that with the sticker on the main frame. When putting the arm rests on, you need to angle it upwards to get it in the hole on the main frame.4. In Step 8, you can disregard the portion in the picture where the telescopic tube is 5 positions up in order to store. This would make folding it pointless. The telescopic tube can be all the way down as it was when shipped. You just need to angle the upper support rob (pull up bar) around the folding tube.Refer to attached pictures in this review.5. In Step 8, the arm rests go on the opposite side when storing.All being said I have a couple suggestions if they improve the design of the pull up station.1. Redesign the quick release handle (or at least in the manual mention that it needs to screwed in to a certain depth). I spent a good couple minutes wondering why there was no tension.2. When folded, the unit should lock so it doesn't open up while transporting it by accident. Could perhaps put a locking mechanism at the base where it folds as this is where the movement is happening. Also the folding tube at the top could have another position on the reset pin where it locks as well when folded.3. Extend the upper rod a bit more so we can docwide grip pull ups4. Extend the length the arm rest so those of us with big hands can do dips easier. My hands barely fit and felt too tight and constrained while doing dips.Hope this review helped in making your decision to see if it is right for you.

Overall this pull-up bar is convenient, well-built, and sturdy enough for basic pull-ups or other calisthenic exercises. It folds up to a convenient size and will fit under a bed or in a closet. It was easy to put together and well-priced. As most reviews have cited, if you are looking for a convenient pull-up bar, at a good price, this is definitely one of the better options.My only two issues are:1) there is no way to do neutral grip pull-ups, as the space between does not allow hands to fit (which may seem deceiving from the pictures on the product page. ) I like to do neutral grip pullups as it works different parts of the back and arms than under or overhand grip pullups. While not a game changer for me, I wish I would have taken it more into consideration before purchasing.2) There seems to be a design flaw in the way the bar is held. Instead of having a support on the bottom, the support guide is on the top, leaving just the turn screw to support the bar and the person's weight - you can see it in the picture I posted. I could see this giving out sooner than later and curious why they would not put the support on the bottom to add one extra level of strength, security, and safety.Overall, not a bad piece of equipment for your home gym.

Great, works well. Easy to assemble. Simple and adjustable. My husband loves it. Great for the price. It’s holds a lot of weight. The machine itself is easy to move because it’s not heavy. We get in good workouts with it and it’s very sturdy.

I've never owned any piece of fitness equipment except a bench and some dumbbells, but figured I could use something that could help me with building my back better. It's not very heavy and can be folded up and stored, which is handy if your floor space is limited. Besides pullups, there are attachments to allow for exercises like chin-ups, dips, knee raises, and pushups. The back pad is sturdy and helps with stability and the arm rests seem pretty solid when doing leg raises. The setup is pretty intuitive, but you'll probably want to double check everything so all the spring clips are in place and everything is tight. The only minor downside is that it is light, so it doesn't take a lot of force to shift it around. You might want to put some dumbbells or plates on the bottom to hold it steady if that is an issue for you. I recommend it for beginners and those who live in small spaces or apartments. If you want something that is very sturdy, you'll need to pay a bit more. Great value for its money.