Getting Started: With the USB power adapter in hand, gently pop off the faceplate to reveal the spy camera control board. STORAGE: NOT INCLUDED SD card You have to insert one sd card by gently pushing the card inward, that motion should propel the card forward, Also allowing you to remove the card entirely from the slot. You can place the MicroSD card into the included USB MicroSD card adapter and connect it to a computer in order to reveal all of the contents stored on the SD card. Taking Video L mode; continuous taking video will take as long as the adapter is connected to power and space remains available on the SD card. Once the disk is full the spy camera will begin to write over the oldest video data. After the power adapter is connected, if you see 3 red flashes this indicates continuous taking mode has been selected and the device is taking video. M mode;. motion detection will take video up to 5 minutes upon detecting motion as long as the adapter is connected to power and space remains available on the SD card. Once the disk is full the spy camera will begin to write over the oldest video data. After the power adapter is connected, if you see 3 blue flashes this indicates motion detection taking mode has been selected and the device is taking video SURVEILLANCE: To best preserve the spy camera functionality you should not use this as a primary charger. Although this is a functioning USB power adapter that will recharge most USB devices, it operates best as surveillance equipment. without the interference of additional equipment.PLACEMENT: You may plug the USB wall charger into any outlet including a wall, floor and power strip or surge protector. Can't Remove Time Stamp,Only Can Change Time(In manual)
Trustpilot
1 week ago
2 weeks ago
