TRQ Front Lower Driver and Passenger Side Control Arm and Ball Joint Set 2 Piece Compatible with 05-15 Toyota Tacoma 4 Wheel Drive 05-15 Tacoma Pre Runner Rear Wheel Drive

I bought this TRQ control arm and the quality is impressive. The material feels very solid and durable, just like the original part. The installation was precise with no extra adjustments needed. I noticed an immediate improvement in the vehicle's stability. A great value for the money to keep your car running smoothly.

Easy install correct fitment for 2013 Kia sportage. Only thing that would have made it better would have been adding a replacement pinch bolt for the ball joint. Overall would purchase again.

I installed the TRQ Front Lower Control Arm with Ball Joint Set on my 2017 Ford F-150, and it made a huge difference in the truck’s handling and comfort. The parts fit perfectly without any modifications, just like OEM quality, and everything lined up exactly as it should. The ball joints were already pre-installed, which saved me a lot of time during the installation. Once installed, the front end felt tighter and more responsive, and the steering became noticeably smoother. The build quality looks excellent—heavy-duty metal with clean welds and solid bushings. After driving for a few weeks, I can say these control arms completely eliminated the previous vibration and looseness I felt. They also seem to handle rough roads much better than the old ones. If you want reliable performance and easy installation at a great price, this TRQ set is definitely worth it.

This fit and was a direct replacement for the lower control arm. I did not use the ball joint so cannot speak to that aspect of it. It definitely improved handling and smoothed out the ride. I would recommend this over other cheaper ones, it feels very solid and the ball joint actually fits. Cannot say anything about longevity for the part, as it’s only been on a few days, but has held up well even after hitting a small pot hole and going over train tracks.

2017 Honda Pilot exact replacement lower Control Arms. 5 star quality. Fit is exact and Quality is as good or better than OE.

Well, they seemed good at first on my 2012 Subaru. My local mechanic installed them with other front suspension parts and struts. Drove well for about 4 weeks. This past week, my front right wheel started to have a thumping noise and I felt it more upon wheel revolution; especially when turning left. Brought the car back to the mechanic and I was informed that the ball joints in the control arms were faulty/defective. Proceeded to order the Amazon “overnight available”Moog Ball Joints to swap out of each control arms. Came in a day and dropped off for the swap out/install. When picking up the car, they showed me the faulty ball joints. The rubber connection was loose and the joints had way too much lateral movement. Anyway, very disappointed in this part as it cost me several hundred in additional repairs.

The control arms are great - high quality and they bushings look good. Car rides well after install as well. As well as a Jeep can ride anyway. The suspension design on this vehicle is absolutely heinous - the way the ball joints press into the steering knuckle make it impossible to do with a normal ball joint press. Save yourself the $ and skip these ball joints and go buy the Mevotech set that comes with the special tool that allows you to press it. Sadly, the ball joints that came with this kit ended up in the trash. Replacing the ball joints on this vehicle was one of the worst jobs I've ever done as a professional mechanic. Do yourself a favor and don't ever buy a Jeep.

Installed this TRQ front end kit on my 2003 Toyota Tundra (2WD, ~200k miles) as a full front-end refresh. I did the install myself and everything went together without any issues—no fitment problems, no fighting bolts, and all the components lined up like they should. Before this, the truck had a pretty rough front end. Turns out one of my upper control arms was actually bent, which I didn’t realize until I got everything apart. After installing this kit, it completely fixed the issues I was having. The ride is noticeably smoother and the front end feels tight again instead of worn out and sloppy. I was also able to get a proper alignment afterward with no problems, which is always a good sign that everything is within spec. As far as quality, I’d say it’s not quite as robust or heavy-duty feeling as OEM parts, but for the price and what it’s meant for, it does the job well. For a high-mileage truck like mine, this was a solid way to bring it back to life without spending a fortune. Overall, I’m happy with it and would buy it again. Time will tell on long-term durability, but so far it’s performing exactly how I hoped.

Very good quality parts at an extremely good price, fit on my 2007 jeep compass perfect! It can be hard to find quality parts for a good price but TRQ has great parts and pricing

Don’t ever buy this. Within a year had to replace. Squeaky noise.

Exalent product.. Little bit delay delivery but amazing packing.

Le quedo muy bien a una jeep compass trailhawk 2018

Fits 2012 2500 ram