Prime-Line D 1735 Roller Assembly, 1-1/4 In. Tandem Wheels, Concave Edge, Ball Bearing (Single Pack)

fit like orig.

Had to replace my old rollers, these did the trick nicely. Easy to install after getting my old, rusted rollers out. They roll nice and I'm happy to have goods ones in there now. Will be buying more for my other door and maybe an extra just in case.

20 year od door wall, hard to find cross reference for part, this one does worked. !.24 wheel diameter, none had tabs found on original and I found it worked without them. I would have prefered the 1.5 inch wheels but didn't want to mess with clearance issues.Very heavy door, I did it myself but would recommend having someone on call when your ready to actually remove the panel, replacing the wheel sets is a 5 minute job once the panels out.Hardest part was getting the sliding door panel out, very tight fit, sanded down the inside vinyl rail attached to the frame about an 1/8 of an inch and sanded (2) 1/4" releif cuts 3 'long to give clearance for the wheels which would not fully recede into the glass panel. you also need that relief cut to be able to slide a screw driver in to push the wheels up to clear the frame when removing.Check that the wheel assemblies seat proberly and raise up and down before installing, I had some binding issues and had to remove everything a secound time, found the secound time around it was beeter to just loosly snung up the mounting screw before installing and snug them up after getting evething on track

All metal construction! The rollers I had to replace had broken PLASTIC rollers...I thought, "really!?"I will state that I am a home owner learning as I go and not a pro or even a guy with a lot of experience. I don't consider myself to be all that "handy" but I do try.At any rate, these seem well built and roll better & smoother than the old ones ever did. I gave them 4 stars because they only come with the 2 screws for vertical adjustment. No mounting screws are included (not mine, at least) with these so if my originals were stripped or too worn to re-use so in my opinion that lost a star.

Not an exact match for my old sliding door, but after some messing around, finally got it to work and the door finally opens again. Amazon had these at a much better price than my local home depot too!

Had a glass sliding door that was really tough to open and close. Finally broke down and got two of these guys. First I will say at no fault of the product, the door was a huge pain to get off. The old assembly was seized in the door and the screws to lower the wheels were stripped and seized to the point that I had to pry the door out. Thankfully I didnt damage the door or trim around it.On to the install of the new product. Super easy. Weren't the exact replacement for the old one as the old had two hooks, on the top that slide into place up inside the door, however the holes lined up for the screws to install correctly so I thought i would proceed anyway. Boy am i glad i did. This door glides like a hot knife through butter. I can use a finger to move the door closed. Wish I would have done this years ago.The metal housing and wheels seem sturdy, but for what I paid for them, I wouldn't mind replacing them in 3 or 4 years (we use this door a lot and have dogs going in and out, plus hair and gunk build up etc). Overall, if you are on the fence at all, put it in your cart, and press the checkout button.

The product does not come with the 1/4" screw needed to attach the door. What should have been a 10 minute job turned into an hour. I had a 1/4" bolt I cut and filed to the correct length.It worked, but pissed me off the manufacture did not have the insight to include a $0.20 machine screw.Idiots..

These rollers were the only roller assemblies that were the same as my originals except for one thing. My original assemblies had plastic or nylon wheels and the bearings had warn out. So I searched for an exact replacement and could only find these with metal wheels. I thought they should work but was hesitant until i read other reviews that mentioned they replaced the nylon wheels with these, and very much like most of their reviews these worked out wonderfully for me. They are a bit annoying to install because you have to take door off the track but it's a lot better then having a none rolling door that needs constant attention and lots of lubricant on the track so door will move, which is only a band aid. So do yourself a favor and get new assemblies if yours are worn out because it is oddly quite satisfying when your sliding glass door glides across the track as it originally did.