DAYBETTERLed Strip Lights Waterproof, 32.8ft(2 Rolls of 16.4ft) Led Tape Lights Color Changing 300 LEDs Light Strips Kit with 44 Keys Ir Remote Controller and 12v Power Supply for Indoor Outdoor Use

Waited a bit to leave a review to make sure it is an accurate review, but here it is. Wanted to install LED lights on my pool and researched for quite some time and finally stumbled upon these lights. I always read only the negative reviews because that’s what points to product failure. These lights had the least amount of reviews as related to actual light failure and some complained about adhesion. If you know anything about glues, you know prepwork is key. So I went ahead and ordered. Cleaned the area where I was going to glue these lights with acetone making sure no dirt oils or anything that can affect adhesion would be there. Low and behold, they stick and stay there (mind you, in hot Florida sun!) super happy with these lights. App is easy to use, can pick whatever colors, or make em dance to music. Time will tell how long they will last but I’m happy with my purchase.

I love the lights sooo much. Just got this lights maybe 5 months ago and they just stopped working please help

Arrived quickly and in great condition. It’s all in one box and the instructions are easy.

So these look great, work great, are extremely bright, and super easy to install with a great remote. However it’s bigger problem is first, they claim that they are outdoor however the connector, adapter, and plug in aren’t! I have to buy a cord protector box light enough to attach or hang somewhere. Also if I want to cut them to make a sharp corner with them you have to use a waterproof connector which it doesn’t come with. This is my biggest complaint time and time again with these outdoor decorations! Why make and say something is outdoor but a part of it isn’t and I have to buy something additional to protect it! Also the kit comes with only one connector, one adapter, and one plug in so if you want to cut them, turn corners, or change them in any way you have buy a connector adapter power source kit. The sellers page didn’t even have all those pieces or corner/multi turn connectors and what they did have wasn’t waterproof so I had to search myself to need to spend an additional $20. The box should at least come with multiple connector kits. These are great and beautiful if you’re going in a straight line and using the whole strip at once but if you want to customize anything then I would try to find some with more kits.

The Day Better kit worked for me though I will add a few tips I learned that helpEd me that may help future buyers .1) if you don’t need IP65 waterproof where you are installing them, consider Getting regular strips... the Silicon has tended to make my very simple indoor van installation quite a royal pain with the available connectors out there.. I used the waterproof not because it was outdoors but it was running near roof cavity’s that do potentially sweat In outdoor temp changes etc or fingers grab looking for things and dust accumulation Etc to cause problems which the silicone protects against but in my case if I had it to do over I would try the the sturdiest non waterproof set available as the connector kits out there are much more plug and play and unless you’re installing a lot of these and don’t mind buying large kits of spare parts to have around for troubleshooting options and creative installs it gets expensive trying to make a basic install work and get good connections with these waterproof strips if you are turning corners or needing wire runs to different sections of light strip.2) if you estimate you need the 16ft kits get the 32 ft at least... trust me in experienced in electrical and finicky installs and some of the connections go smooth and work like candy but suddenly when you start cutting and recurring strips because your piercing style connectors are junk , you need more strip to go through until you get experienced.3) if you want bright light go with the more lights per inch strips.. I wanted to save overall amp draw and only needed mood/ambience so I got the less lights per inch.. but it has dimmer settings... so unless you know you only want mood brightness get the denser lit strip and turn it up and down you will have more bright light capabilities.3) take care to cut the ends perfect. The ends being even make all the difference inside the connections4) if using the strip to 4 wire harness piercing style connectors, use an electrical tester at each leg/each side of every connection you make. Leave the strip end coming from the controller connection on and connect to the strip then test the lead end side of the connectors to make sure you have voltage. Then connect section of wire and test the wire end before connecting to another section of light strip test the far side of the connector where the next strip is going.. with the lights on then you will often get a connection just by touching the strip end to the connector.5 ) on connectors. You will go through so many connectors getting good fits on the piercing variety for waterproof strips get plenty.Tips others have posted about , helps to use a spare connector to pierce your wires and sometimes your strip first so you don’t damage or wear out a connector that you intend to be permanently in the circuit...I even cut a little bit of light strip with wire on it to use as the tester and pre piercing connector when connecting a set of wires to a strip end.Pulling on the wire a bit helps to make a good connection at times. Be very meticulous cutting the ends of the connectors.Finally for strip to strip or strip to wire connectors consider getting the kind made to slip under the prongs that’s are more designed for the non waterproof kind but some say waterproof because they will house the raised curve of the silicone when closed but the connection method is the same as non waterproof strips and is non piercing.. you simply have to work the end where you’ve cut the strip like you’re peeling the adhesive but instead you gently get the silicone to lift off the backing tape that is the circuit and expose the contacts and slip that under the connector tongs and let the silicone come back down and close the connector.. possibly wire solder the other end if you want a strip to wire connection... although for a novice soldering it wouldn’t be easy..Basically don’t get waterproof ones unless you have a lot of extra strip to work with and ruin or unless you really need the waterproof kind...Maybe consider inventing a better strip to wire connector for these waterproof strips because they are all junk!Hope this helps.

I specifically ordered these for outdoor and made sure they were all weather safe. I put them up round my pool. They looked amazing. First night we received a storm. They no longer work. I’ve tried everything. My pool is plugged into the same outlet it runs without an issue so it’s not the plug. I’m so disappointed as I am having a party this Friday and boy were these lights pretty for the 6hrs they lasted. I would return but I threw away the box.

Easy to install plus the adhesive is amazing. Be careful pressing down to stick the lights may get damaged. Br8ght colors and easy install. My favorite so far!!

I bought this to replace LED Strip lights that I bought at Costco a couple years ago and stopped working after operating everyday for 4 hours a day.The two 16.4 ft rolls cannot be connected to each other. This was an issue because I could not getting the wrap around coverage on my deck using the same power source that my old lights used. I had to buy an outdoor extension cord to reach the center point of my intended use to get the coverage I wanted.This item states that it has 18 led lights per meter and are brighter than the competition 12 led lights per meter. Well, I am disappointed with the light output because it is not good as the set I had. In addition to the lower light brightness, the color white is a cool white so it has a blueish tint and my old lights did not. I would have given a 2 1/2 rating if it was an option. The remote is nice if someone wants to play changing the colors or use other features but I have no use for that either.