QLLY Adjustable Square Table Leg, 24-40 inch, 60-100cm, Home Office Custom DIY Table Legs, Furniture Leg Set (4, Black)

I was terrified that these might not work. I had a table top but no legs. I bought these as I was hoping I might be able to make them work. I didn’t need to. THEY WERE PERFECT!!!! They look like they came with the table top. They were easy to install. They came with all the hardware and it was easy to see how they were put together. They are very sturdy and OMG the adjustable legs are fantastic. I can have a short table or a bar table. No wobbling and have adjustable feet if your floor is uneven. I couldn’t be happier!! I love them!

I had a long table I got for free n put it in sewing room which had like particle board sidings n was quite high..n because it was taken apart n moved ..was wobbly n not secure..So never really got used.I threw away frame n kept top..n searched for legs..I didn't know height I wanted so looked for heavy duty adjustable and found these legs..So decided to get 2 sets of these four pack legs (8)Cuz tabletop was long n heavy decided on 8.For height I decided on putting it second hole from bottom , which was perfect for grandkids n my other half who is wheelchair bound..The only thing I would suggest is make sure when securing center larger bolt that attaches leg to mounting bracket in center,make sure it is really securely tight.. .BEFORE mounting to tabletop.I definitely would suggest power tool screw gun for mounting.I used mount as a template prior drew out holes .. put 2 inches from edge ..then instead of predrilled holes I just got a hammer n finishing nail n tapped starter holes in my marks that I made.( worked quicker) when it came time to mount..FIRST time some legs was not secured real tight to mounting bracket so had to remove all the screws on loose legs to get underto that center bolt n retighten it.So pay attention to tightening that before.. otherwise legs will be wobbly even if you think you tightened it secure by hand .Great product ..just didn't have instructions but pretty easy to figure out..Love my new workspace.

I used these for a table I built out of a piece of butcher block countertop and they look great. They’re very thick, solid, and sturdy once secured at the height you want. You really do need to use an electric screwdriver to fully secure them inside the base plates or they will wobble though (I learned that the hard way and ended up having to redo them). My only real complaint is that the height options are weird. I’m short and I wanted 25in legs for my table. At the lowest setting these are 23.5in, not 24, and the next rung up is 25.5in. I ended up taking off the taps that came on them from the bottom of the feet and attaching ones that would help me get my desired height. The taps just screw in so finding something and replacing them was very easy. I just used some 1.5in couch legs with the legs at the lowest rung (the 23.5in) to get my desired 25in height. All secured the heavy butcher block is well supported and solid.

The legs are just what I needed to convert the top of an old television (from back when TVs used to be furniture, made from luxurious wood) into an "L" extension onto my office desk. I used two of the four legs on the far end of the table, and have the edge of the desk supporting the other. I couldn't use the other two legs as support as they would have blocked access to the desk drawers in my configuration.I was able to adjust the legs to be the exact height I needed. The legs mounted very securely, with the eight screws per leg, into the hardwood top. These are high-quality table supports and I would highly recommend them for any surface of 3/4" thickness or more that can accept screws..

Item as described highly recommend this seller

The holes in the legs adjust the length in 2" increments. The foot can fine tune the length adding less than half an inch, so if you need the leg to be a precise length you might not be able to achieve it. The bolt in the foot needs to be longer to give you infinite adjustability. And the listing on Amazon doesn't specify the bolt's size (diameter & thread size) so you don't know what to purchase to replace it with.

We purchased 2 sets of these legs from Amazon for two model railroad layout tables. The reason we bought this particular set is that they had a height adjust range that included the approximate height we were looking for (24 - 40 inch height range). Most of the table leg sets we looked at had a max height of 30 inches. These table legs were a pleasant surprise in that they are very sturdy. They are made with a pretty heavy gauge steel that I assume will hold any amount of weight we would need them for (leg is advertised to support 220lbs). The plate that fastens to the bottom of the table allows for eight screws. We actually used a heavier gauge screw than what came with the leg set to fasten the plate to the underside of the table. That is not a shortcoming of the leg, that's just us overengineering for piece of mind. They're brand new so time will tell if these legs will hold up, but it seems like they'll have no problem at all supporting our train layout tables. One note: the picture we included has the table legs sitting on red castors. The castors did NOT come with the legs. We added those ourselves so we can move the tables around if we need to. Very happy with the quality, would buy again, and would recommend.

Took less than 30 minutes to get these out of the packaging and installed onto a board to make a nice table for my microsoldering set up. High quality and easy to install make this product a must have for someone who needs a table FAST! The great thing is that they were the perfect size for what I need and they can adjust to different sizes for other needs I may have in the future.