CargoGlideHigh Sides Standard Kit 48" L

If your cargoglide is above a decked system this won't work with a topper. The front hits the topper before the slide is in the locked position.

It seems like Cargo Glide might have been "bought out", so if you've been thinking of getting the High Sides Kit, or other accessories, you might want to go ahead and acquire while they are still available. Amazon had the best prices, and availability.Note, it was necessary to drill five 1/4" holes in the Cargo Glide. Two hole locations were not accessible with a "normal drill". I finally figured out you can lift up on the upper panel and pull it out beyond the normal stop-point to get access to the place on the side rail to drill the two side holes. Also, while I was at it, I checked the tightness of all the existing bolts under the Cargo Glide. Most were loose and some had actually come apart. Glad I was able to fix this before any problems developed.

We thought this was the whole tray with high sides, IT IS NOT. This is the SIDES ONLY.

At $112 for three pieces of aluminum risers and a set of screws, I was disappointed in the craftsmanship. Two of the factory pre-drilled screw holes were not properly aligned and required redrilling and there were burrs on some of the aluminum edges that I will need to file smooth. Although the packaging was undamaged, one of the 90° brackets was bent and needed to be straightened, I can only assume it left the factory that way.I bought this for the finished look and to keep small items from rolling over the lip at the front of the cargo glide tray. I just wish American craftsmanship was still a priority.Finally, Cargo Glide's rebate fulfillment contractor never sent my $50 rebate during the past year either. They must have problems at the corporate level that will hurt their sales in the long run. Do better cargo Glide!

Pretty straightforward. They work. Easy to install. Stops stuff from falling off the tray.

This kit is a great addition to the cargo glide, although I did have a problem with drilling 1 spot out for some holes to add rigidity to the glide, as there is not a lot of room inside the bed once you have the glide installed.My tools now stay in place better now the walls are taller and helps make the glide even with the top of the wheel tubs for sliding bigger stuff in the bed.

Returned as it was not complete.

Great addition to the rollout things don't fall off the sides anymore. If you buy a cargo roll out buy these sides