Epoxy Floor Squeegees - Notched Squeegee 16” are Used to Apply Heavy coatings Such as epoxy, Urethane, Cement Self-Leveling. The Best Serrated Squeegee to Apply epoxy Floor coverings.

In my experience, the ability to reuse a tool is essential. the rail is rigid and is meant to be adjustable and easy to clean. it is well made and is industry standard attachable to most threaded poles or handles.

Idk what other people are talking about this doesn't fit on standard utility pole or broomstick threads. I tried both and it screwed right on. Did the job well for Mapei self lever plus

If your going to put non standard thread on the socket portion that doesn’t fit any extension pole in USA. Maybe include a pole or don’t sell in America. I’m a general contractor I have 15 poles it fit none.

Doesn't work with standard handle unless you wrap it, i just cut some duct tape into a strip and put a few wraps on the treaded side of handle and screwed in without issue, did what I needed to smooth some self leveling compound

As reported by other reviewers, the threaded hole for a pole is a bit too large. None of my poles would work. I went to the hardware store and found a pole that would barely work. I put one wrap of duct tape around the threads on the pole which made a sturdy fit.

If you’re going to put down an expensive epoxy floor, you need to do it with this dude. Drawback is, you’ll need a long handle from Lowe’s or HD

The blade and frame seem sturdy enough but it doesn't screw onto a standard threaded pole. You'll need a threaded broom handle or other cheaper handle.

I used it to spread epoxy and it worked great spreading it evenly.