S&Z TOPHAND 40 in. x 84 in. Barn Door, 20/24/28/30/32/36/38/40/42/46in Unfinished British Brace BarnDoor/Modern Style/Solid Wood/Sliding Door/A Simple Assembly is Required (40, Unfinished)

Was busted up on delivery it was really tough to put together because of the damage. The door seems very solid and it does look very good where we have it hung. I would’ve returned the door but it was an emergency situation and we had to have it for a bathroom.

I recently had a pantry built and chose these doors to use on this new pantry. They were easy to stain and poly and easy to put together. I decided to purchase 2 of them and make them into a bi-fold door hung by barn door track. Love it

I bought two of these doors to make a double sliding barndoor for my utility room, I was tired of the cheap, folding doors I had before. These doors are as described, they are well made. It would be nice to be a bit better sanded but I did do my own sanding with 220 grit and they came out nice. Assembly was easy, took less than 30 min per door. Then I air spray painted with matte white paint that I used many times before. but never on spruce... After the paint dried, I noticed a yellow coloring in the areas where there were some defects in the door. If you would just stain these doors or paint any other color than white, you should not have this issue. But the sap in the wood comes out thru the white paint and leaves an ugly looking yellow stain. You cannot cover this yellow color even with multiple coats of paint, I've tried already. I had to remove the paint in those areas and clean up and then use Bondo to cover up the big gouge that I made in the door. Using normal wood filler didn't work because the sap came thru the wood filler as well and it still showed thru the paint. The Bondo worked well. This happen on both doors and both sides of the doors, so chances are probably very high that you will find this kind of areas on the door that you will buy too. But if you see something similar, just clean the area and use the Bondo before painting and the door will look great and be very solid. Good luck!

Some boards arrived propellered Causing the whole door to hang cockeyed. I emailed the company and they sent the replacement boards right away at no cost. I’d recommend assembling it with a mallet because everything fits tight.

Warped slat caused center board to split. The beginning and end slats were hard to get to fit because of how warped some were. Had high hopes this would be an easy door to put together. Had to request replacements...Received replacements for bad boards. Finally got it all together. Would have been a lot easier if the boards were not warped.

although they looked nice, they were warped and do not hang straight, due to curvature, they stand out from the frame an inch from the top, and rub the frame at the bottom. if you don't care about whether they are straight, then they may work for you because they look good - they just don't hang well.UPDATE: When I contacted the company about the warped boards issue, they responded THE SAME DAY and within a week I had brand new doors that hung straight and look great. I only gave 4 stars because of the hassle of staining and assembling them twice, but, the end result is just what I wanted. Kudos to the company on outstanding customer service!!

Very easy to customize height for an experianced carpenter.

Perfect size for our master bath!