⚡ Wire smarter, not harder — power your projects with precision and style!
The NAOEVO 16 Gauge 2 Conductor Wire features high-precision oxygen-free tinned copper strands for exceptional conductivity and low resistance. With IP68 waterproofing, VW-1 flame retardant rating, and a wide temperature tolerance (-22°F to 221°F), this flexible, lightweight cable is engineered for demanding automotive, marine, and low voltage applications. Included heat-shrink tubes and cable ties add professional-grade protection and convenience.
L**N
It's a wire. Hard to mess that up
It's a wire. It works. Have had no issues. I used some of this wire on my motorcycle that I leave outside in the rain in the snow and everything else. The wiring insulation has worked just fine as long as you cap the ends properly and solder things. This wires had no issues thus far.
D**G
Very easy to use
I really like this wire. The coil was held together by two velcro strips that made it easy to unwind. After unwinding, the wire laid almost perfectly flat and I did not have to fight with its coils. Finally the black outer sheath was very easy to cut back to give access to the two conductors.
G**S
Excellent wire! Double jacketed, flexible enough to be readily snaked
I purchased this wire initially for installing some pod foglights on my truck. For that it worked extremely well and I ended up using the leftover wire in a bunch of endeavors. It's great general purpose 14awg wire and handy to have on hand.
S**.
Works great
Perfect cable, easy to strip, copper seems to be good quality and correct thickness and size
M**O
Good quality
Good quality wire i bought a few different rolls already and have used them in all types of environments including for marine use.
C**S
Works well fixes issue of gap.*
Installation was simple. I needed more hardware due to my door design. Bottom of my door is open so there is nothing for the aluminum to fasten to. I purchased aluminum angle from home center and lami nated the door , one out side and one inside at bottom outer door skin. That gav e me a good surface to mount the track to. Its important to deburr the joints and align them so the rubber seal can slide thru the track and not hang up. Silicone spray and a little no a lot of elbow grease got it in place. You will need 2 people for seal install 1 to pull and 1 to feed the strip im the track. Pictures shows the dimple from this being folded during shipping. Note installed when it was 80 degrees. Its now 5 months and 25 degrees. Dimples did not level out. Overall satisfied with product would do the whole thing over if needed. Looks good. works within 95% of expectation. Wic in my book is rare. Thanks
F**T
Great value really good product
Works really well. Well made price is great
E**D
Perfect
Top notch. Quality wire and coatings. Great to work with.
Trustpilot
2 weeks ago
2 months ago
