Montana Cans Montana EFFECT 400 ml Metallic Color, Copper Spray Paint, 13.5256 Fl Oz (Pack of 1)

Great paint and coverage

THIS PAINT BUILDS so don’t expect the first coats to look anything like the finished results. If you spray in one application until it looks good it’s gonna run and separate and look awful. That’s what happened to guitar guy.I’m using this as a color-match to the OEM factory metallic green on a 1976 Dodge B300 Tradesman van. Obviously it’s not a perfect match because the factory paint is a build-up of three different coatings (base, color, clear top coat), HOWEVER! Applied carefully it’s actually very, very close to the original.People say it about spray paint all there time: “Apply light coats!” With this paint you really (really) should go light. Really light.For this paint I warm up the surface I’m painting with a heat gun until it’s uniformly warm to the touch. I also warm up the can until it’s the same. I always start and stop off the surface so I’m never using the first paint out of the can and the can is never holding still. Use a shield if you need to spot cover interior areas.

I was looking forward to using this on a guitar kit build. Prepped the body with grain filler, sealer, several coats of primer, sanding in between - everything I normally do. The paint nozzle is horrid. No consistency of application, very blotchy and "spitty". Tried the other can with the same results. Not only is the application horrible, there is really no metallic effect to the paint. I could have done much a much better job with a can of spray paint that rhymes with Pylon. No amount of shaking, clearing the nozzle, etc worked. To top it all off, one of the cans quit spraying with 1/3 of the product left. Not a fan. I am forced to redo this job. Will definitely be using a different brand.

Great paint. I order many here and there and no problems. Even shipped well enough.

I purchase quit often. I enjoy my crafting and I have to always have this color along with a few others. Only found it through amazon

No stars because it did not work at all. The cap was missing, the nozzle was there but it didn't work, the nozzle did not depress the interior valve, so, no paint. No returns! I'm pissed!EDIT, I did a little research and found out there is a black plastic flat washer on the can below the nozzle which keeps the nozzle from depressing, removed this and it works fine. 4 stars because there was no notification of any kind descriping this.

Awesome spray paint

If you prepare the surface correctly, this paint goes on evenly, creates a beautiful metallic finish. I have tried other metallic paints from auto parts stores and they are terrible. After getting used to the spray pattern on a piece of cardboard, the results are below.