AtrendBBox E10D Dual 10" Sealed Carpeted Subwoofer Enclosure, Black

This box was 220 when I bought one and they’re down to 170 something now which is a steal, I’ve beat the crap out of mine and it’s been in 3 car accidents and it has no air leaks, no bulging on the sides, very sturdy, not bad considering I’ve had this for 2-3 years and it’s seen hell. I have a pair of skar 15” 1200 watt max per speaker (2400 max, 1200 rms total) in the bbox dual ported 15” box. I had it running off a 6000w max, 3000w rms taramps amp and with it on rms (for the subs (1200w) power with my subs in a sedan is so loud you can’t hear anything outside the vehicle including loud vehicles and construction and makes the windshield flex and making the windshield wipers bounced up and down, it’s a very quality box with also pretty good subs in it as well, also has now made my rear view mirror fall off.😂 you can’t beat the quality for this price especially if you’re trying to go a little bit less expensive and you don’t wanna have to go get a custom one made (which is the best option) but for a prefab one with good sound and good airflow in the port for this price it’s a great option if you’re not tryna pay an arm and leg but still want good sound.

I bridged a Taramps TS 400x4 AMP to power 2 400 WATT, Skar 10 inch 2 ohm, duel voice coil subwoofers wired in parallel making them 4 ohms. My front/rear Sony coaxial speakers are wired through 2 separate Taramps TL-1500's for 95x4. The subwoofers are in THIS sealed enclosure, not ported. That is my preference. I have always liked the cone response from subs in a sealed enclosure, but to each his own. The enclosure is heavy, it's constructed of MDF. The fabric is adhered perfectly to the box with ZERO flaws. I had forgotten what it was like to have a nice car stereo. The 3 amps are very small but don't let that deceive you. In the cabin of my 96 Subaru Impreza outback, this setup will knock your socks off. Unbelievable.

While I bought this sub box for a project I had in mind, it never came to fruition, so I ended up selling it to a local Eco-Town vendor. It arrived in perfect, new condition. I could still smell the fresh glue used to adhere the fabric to the MDF which was 3/4” in thickness IIRC. Minus one star because of the spring loaded speaker wire connectors. A 5 Way Binding Terminal would’ve been a better choice, but this could be easily changed by the user. Over all though, the build & construction quality appeared to be top notch. Regretfully I abandoned the project and sold the Sony Subwoofers that were given to me by a friend which ignited my idea for the project. I had soldered in some decent 12g wiring to the terminals and had the fiber material and hardware all ready to go before skipping the project. I had planned on using it as an indoor, dual stereo sub for my 2ch. bedroom rig which consisted of a 2ch. Harmon Kardon HK3480 and a pair of Polk Audio TS2 Blackstone Speaker which sounded pretty darn good for the size of these little gems. I still have them and use a vintage Pioneer powered sub. Beast of a receiver and this rig sings when I just wanna kick it in my bedroom to listen to music or watch a movie on a small 23” Vizio TV. I used a Yamaha S1800 Universal DVD/CD/SACD player as the main source. But I digress, this speaker box is pretty good for the money and pretty sure I could’ve dialed it in for some decent thump using a small amp to drive the woofers. I’m all into making my own cabling and doing mad scientist projects like this. Hey! It’s a hobby and it’s all about having fun and enjoying.

Great box!!.. even bought a used model at discount price!!.. nearly no noticeable imperfections.. put 2 skar SVR8D4s in and plays everything from around 28hz up no issues! 5 outta 5 would buy again!!

I purchased this box to house two Kicker CompR 10's after my other painfully cheap subs started falling apart. This box looked fantastic when it arrived and the cut-out holes fit the CompR 10's perfectly. The sealant for the edges on the inside was a little thin in some spots, so I decided to go ahead and add more silicone to all the edges for some extra sealing. Not a big deal at all. This box does take up a little more room than I would like in my little Mazda 3 trunk, but it also does meet the minimum volume for the drivers I ordered.There aren't many complaints or little nitpicks I can list because once I heard my new drivers in this box... I was SHOOK! I could not believe how much bass I now had on the same amplifier.

$92 descent, unless it’s a custom box, I’m not building another one the price of materials and labor equals out to a lot more than $92 and it does just so happen to be real 3/4” MDF, which ain’t cheap, and the carpet has a really nice color it is .7 ft.³. not including the port, .85 ft.³ including the port per/sub, These kappa’s call for 1 ft.³ each ideally, apparently they’re not too fussy because they sound BA in this box

I bought the dual 8 inch box and it looks and sounds really good however, It smells terrible!I put this in the back of my wife's van thinking the smell would go away but I was wrong. I ended up taking it back out after a few weeks and now its in the garage. I've tryed putting baking soda inside the box and multiple air fresheners with no luck. :( disapointed for sure.

The carpet was in great shape and the box is built rugged with 3/4 MSD . I put 2 kicker comp 12s in the box gave it lots insulation the speakers have good deep bass . My only complaint is the wire connections are cheap i switched them out with better ones.