EASYGUARDEC004 Smart RFID Push Engine Start Button kit & Keyless Go System Upgrade Key Start to Push Start Cars Fits for Most DC12V Cars

The media could not be loaded. Awesome product! I will start off by mentioning that I am a professional automotive technician, and this may have be easier for someone with a similar skill set, however who is mechanically inclined, should have no problem installing this. So, I have a 99 Ford Ranger and the ignition rod (part that controls the position of the ignition switch when turning the key) broke a couple years ago back and I had to dismount the ignition switch from the steering column and start the truck by manually moving the ignition switch the proper position because replacing the ignition rod is labor intensive and involves removing the entire steering column from the vehicle. However after finding this product I decided to take a chance and try it and I’m so glad that I did because it worked out exactly how I wanted it to. It starts the vehicle and it also allows for the “accessory on” position of the ignition switch. You will need access to a wiring diagram for your vehicle’s ignition system in order to wire it up properly. It was a very easy install and for $24 and about 1.5-2 hours of time I am extremely happy! Highly recommend, especially for an older vehicle that doesn’t have a PATS (Passive Anti Theft System). For me this was a much better solution than replacing the ignition rod in the steering column.

I added this to my vehicle and its perfect. Works great, easy to install, everything works at it should. Protect vehicle from being stolen too.

how it works in my car.....[...]bought this to change the car up a bit and replace the old style key it started to wear down a bit and wouldn't always work. first will start with quality everything in the box is about a 8 and a half on a 1/10 scale which is not bad at all. The RFID tags are plastic which s fine but i definitely would recommend picking up a couple more so if you have other family members that drive that car you dont have to keep taking the tags off. The button its self i was shocked and is really nice looks like a factory button from any new vehicle. The module itself is plastic and that fine because its meant to be hidden anyways aswell as the reader ring. this is a good buy aswell if your rebuilding a car and dont wanna pay 100$ for a lock cylinder as well.something that will have buyers hesitant is where the instructions ask you to cut your key and leave it in your ignition. THIS YOU DO NOT HAVE TO DO! you do not have to do this they best way to go is to remove the cyclinder lock entirely you can easly google how to remove your lock cyclinder from what ever car you have.Install:who can install it? id say anybody....if you have the diagramthe install was a bit harder if you dont have your cars ignition diagram. but its fairly straight forward. the instructions the company gives you on the other hand are bad. what helped me was doing the instructions backwards. for example hook up the wires that you know for example the black wire on the module would go to the black wire in your ignition if that was the diagram says for your car. If you do have trouble you can go to your local mechanic and have them install it but make sure you have your ignition diagram or they will be stumbled.tools:yes you will need tools for this your going to need a wire stripper 12 dollars at your local autozone and buy a bunch of quick splice connectors. you can get those at autozone as well. Id recomment the ones that have the conductive gel inside them. you will also need one T-tap for the break wire.pros:it works as it says if you install it right... when its all hooked up you it should work like this, place rfid where the reader is, it will sound and then you can apply breaks and press the button to start. when you want to shut the car off apply brakes and then push button and move the tag.consnow for the cons its not a huge deal but i thought i should put it in anyways one thing you will notice with this is that when you go to remove the rfid tag the system doses not arm with 30 seconds so when you shut the car off and leave the car it take 30+ seconds until the car armed. armed meaning that the button will be useless until it gets the code from the rfid tag again. i do wish their was a way you could change it but sadly you cant.price: is it worth 66$? or the sale price of 45id say 45$ is the sweet spot for this product i would definitely buy thing again and i plain on installing it in another car as well so the price is reasonablelink of video working in my car [...]

These reviews cannot be LEGIT .Engineer & gearhead with 30yrs experienceCar a purchased came with one of these newly installed by previous owner ..... burned out randomly while driving 2 days later and left me STRANDED 30min from home .REPLACED with a new one..... worked great for a week then burned out and smoked out the car --- while STUCK WITH STARTER ENGAGED!!!By the time we could yank the battery cable it had overheated my starter , almost killed my battery, and the control box was smoking like a frieght train.Everything on the car has been triple checked by me and the dealership --- NOTHING was wrong with the CAR . The controllers are poor quality and burned up with 12 volts ..... WITHOUT TRIPPING/BURNING A 10AMP FUSE !!!Beware !!!! You get what you pay for . 25 bucks SEEMS to good to be true because IT IS!!!

Installed on 07 Civic SI 8th gen. Wires were box to car harness.White to blue.Red to white.Black to body ground,tied to nut under wheel.Blue to both red and orange.Yellow to yellow.Hope this helps.

El botón de encendido funciona excelente, debes realizar las conexiones correctas de lo contrario solo te dará problemas. Lo instale en un Mitsubishi 2010 en solo 30 minutos. Funciona a la perfección en cualquier vehículo, solo vean el cableado correcto en YouTube 👍

I had it sitting around for a while before getting to the project. For the money it seemed great but I never was able to get it to work, ended up switching to a goggle switch board w push start. ddnt even try returning, was too late. I should have tried tech support but i was too aggravated. my other switches worked with no issues. I =, not sayig its bad, mayb just fragile