Lumenier Alpha AIO Flight Controller (F4 FC, 4X 30A BLHeli_32 ESC, OSD, PDB, Curr) - 30 Amps

I ordered the first one and it was pretty awesome however I messed up and shorted the board ugh. So I ordered another because I bricked the other. Well I got the other one wired in took no time at all and esc #4 is DOA I can’t get blhelisuite 32 even say there’s 4 esc’s it only keeps finding 3 esc’s number 4 is gone. I ordered the second one from GetFPV directly so now I’ll have to deal with them instead of amazon on the DOA board I hope that goes well. I will updateUpdate they replaced the board and it rocks!

Easy to wire and find a pinout for. Used it on a remix frame and worked much better than the similar Cicada AIO because of the USB port placement. Perfect for a tight build

Nothing so far

I like the idea of this product.Unfortunately one of the coper solder pads came up almoat immediately during what I can only describe aa normal soldering, the subs port.I decided to use another uart for subs and found virtually no documentation on the products only uart ports hidden undwr the Hartsfield. Finally I found a diagram under another manufacturers version of this board and was not able to use another uart port for rx control. It simply woulsnt work. Now my esc , fc and pdb are all dead from a little piece of copper coming off the board. I wish I knew how to repair broken solder pads on pcbs.

Just finished a build with this combo. The build was super easy.FC: Connected to Betaflight without issue, and I love the through-hole connectors for the VTX, radio, & other peripherals - makes soldering much easier. The "floating" accelerometer chip is a nice touch to reduce vibrations. Using a RadioLink controller/RX, which connected and set up with 0 issues.ESC: maiden flight was flawless without tuning any PIDs, and used BL_HeliS to add some "Highway to Hell" startup tones just to test the 4-in-1 flashing. Very punchy on a 4S battery after putting the rates up to 800 (from stock 666 rates) and updating to my weird over-agressive race / under-aggressive acro settings.Bottom line: Everything seems really solid on both boards, there's enough room for everything on the board (could use another ground pad or 2, and sometimes wires are a little longer than I'd like on my build, but meh). Very pleased & would highly recommend for the price.

Wouldnt arm outside of betaflight for some unknown reason. That was fixed by flashing it. But when i got it in the air the 5v bec went out and fc lost power. Still works but i have it running off of 5v from my vtx. I have bought three of these through Amazon and getfpv only one worked with no issues. And it flew very well for months till it went for a swim. The other two have flown but they made me work extra hard to get them in the air. Not asking for my money back just make the board better and ill give you more of my money.

Just was not impressed

Used this w 2207 2400kv motors. Works fine. On a Martian frame. Easy to solder to