Fiberglass Tub Repair Kit (Color Match), 3.7oz Fiberglass Shower, Porcelain Sink and Acrylic Bathtub Repair Kit, Quick to Fix Cracks, Chips, Dents, Holes on Bath Tub & Toilet, Almond/Biscuit/Bone

Stopped our leak! We were really frustrated to find a crack in the tub/shower insert after only 5 years, but this kit saved so much work! It was easy to apply and hardened up in the time it said. Although we did play it safe and gave it an extra 12 hours of drying time.

I got this kit to fix my new bathroom vanity top that I managed to chip during a faucet installation when I dropped my wrench just as I had completed everything. Of course this was the vanity top that I had to special order and wait almost a month to have delivered. I was ready to rip it off and buy another when I saw this kit and decided it would be worth a shot fixing it rather than replace it as I had nothing to lose.The repair kit came complete right down to a pair of disposable gloves I didn't use but wished I had after getting the epoxy on my hands. There are two fairly large jars of epoxy, labeled part A and B but when I pealed back the foil seal on each I found that both were filled about 1/5 (maybe less) of the way up. In addition to the epoxy were two colorants, black and yellow. I was hoping it would include more colors but since I really needed a sort of gray final color and the fact that the epoxy's are white, mixing a little of the black with the epoxy would do it and it did. Be careful to only add a drop of the colorant at a time as a little goes a very long way and I had to mix more than I needed because it was too dark initially. The epoxy's were thicker (and much more sticky) than I had envisioned and getting them off the popsicle stick I was using for mixing was a bit of a chore. One of the good things about this epoxy is, however, that it has a long working time (probably 30 minutes) and is self leveling. I thought this epoxy would be more like fiberglass resin but it is not. It does eventually dry hard but is not quite as glossy.Long story short, I was able to fix my vanity and match the color pretty well. I notice where I fixed the chip only because I'm aware of it but no one in my family was able to find the repair until I pointed it out. In the end I saved myself a lot of work and about $300 on a new top so it was well worth the effort.

Great product I had a massive burn hold on my shower surround from a candle. I covered it up with this and you can’t tell there was ever an issue. The color was almost spot on just mix the orange color sparingly I used 2 drops to make a beige. I hardly needed any of the orange paint.

This feels more like a repair kit you'd create for people before you perfected it. If you’re not already an artist, good luck applying this without some pretty big complications. My biggest gripe would probably be there are no practical tools included, and the mix is so crazy thick and sticky it’s VERY HARD to work with.CONS:=====• No way to equally measure Part A & Part B (no measuring tools of any kind)• No brush or practical applicator included• The mix is like thick, gummy, extremely sticky toothpaste. VERY difficult to apply (with my own brush)• Small Yellow and Black color containers of paint are provided to try and get your final color closer (than pure white), but instructions say to use a tiny drop. The problem is the paint is also the constancy of thick paste, so getting one drop is impossible.• Included sandpaper is extremely fine and gums up quickly. Have some other grits on hand• Extremely messy since mix is very thick and sticky.• Applying mixture to fine areas is difficult as the mixture is so sticky, one pass with a brush can lay down 75% of what you need, but you’ll find the next brush stroke will remove some of what you previously applied. Slightly maddening.PROS:=====• Certainly better than NOT doing anything• Appears to more-or-less work.WHAT COULD BE IMPROVED:=====• Include some proper application tools• Brushes• Scooped Measuring devices• 2-3 different grit sand paper• Better instructions• Possibly a better formula and better thought out way to deal with this insanely sticky substance.

I used this product to fill 6 holes and 2 small nicks in my old acrylic bathtub after removing an old shower door frame. Overall this worked great, the spots are not noticeable from a distance and are only slightly noticeable up-close because I wasn’t able to match the color perfectly since the tub has discolored over the years. But it looks so much amazingly better than it did with the holes or with the shower frame.The only downsides to the kit were 1) I ran out of sandpaper and had to go buy some more, so be prepared if you have difficult or a lot of holes that you may need additional sandpaper (which was easy to get from a home improvement store), and 2) the tool provided for scraping was a bit hard to use to fill holes and evenly scrape the mix across the hole being fixed. I got it pretty close and then put masking tape over top and smoothed the mix out under the tape, and then left the tape on until it was dry for a smoother finish.Also, I’d like to reiterate what another reviewer said - a little color goes a long way. I didn’t add much and the color was already too intense so it took a bit to get it right. So don’t mix all of the A and B compounds together right away in case you need to add more later to lighten your color.