XSPC EX240 Radiator, 120mm x 2, Dual Fan, Multiport, Black

This radiator has a ton of options with all of the 1/4 inch fittings on it.When this radiator arrived, it was packaged inside a bubble wrap bag. When i took it out of the packaging, there was no bent fins, corrosion, or any signs of problems.The radiator supports 2 120mm fans; which could be case fans or high static pressure radiator fans. It comes with all of the hardware needed to mount it including 8 long screws for fans, and 8 short screws for mounting it to the case.All of the holes were plugged with plastic plugs, which was a let down a little bit considering i had to purchase more 1/4 inch plugs to plug up all the extra holes to use the radiator, which means the radiator is technically not good to go right out of the box if you don't have the plugs, or was not planning to use all of the holes in the radiator.This radiator has a total of 6 1/4 inch threaded holes which is amazing tho, because it give you a lot of versatility. You have 2 holes on the front, 2 on the side, and 2 on the back for plenty of options.When I flushed the radiator out before use, there was nothing but clean distilled water that came out (which is what i flushed it with).Threading the fittings into the holes were nice and easy, with no issues. The fans line up perfectly and it does its job perfectly.The only reason I gave it 4 stars instead of 5, was the fact of it not coming with the plugs in the box, so you have to purchase additional plugs to use this radiator if you did not have extras lying around.

The whole reason to get this is the multiple ports. Using almost all of them whether it's for the loop itself or for fill/bleed ports and for water temp sensors. Fantastic. The core itself isn't any thicker than the TX240 so don't be expecting much more cooling performance given the thickness on this one, but great for different uses thanks to the multiple ports available.

This radiator is very unique you have 3 ins and 3 outs so it allows you to feed one to three separate water blocks into one radiator and have one to three out the radiator is packaged very well from the company one of the best companies I have seen who have packed their radiators nicely and securely the radiator performs well and you do not have to have your fans on high to get air to go through the radiator a lot of the radiators I have used have pipes and fins the transfer of heat out of the fluid but this one has narrow channels which slows down the fluid so it allows more heat to be transferred off the fluid I've only seen a very slight volume drop change from my last radiator that used pipe instead of narrow channel like this one but the heat dissipation is greatly increased Highly. I highly recommend this radiator

Great design had multiple I/O on radiator. So I can custom the fitting and hose for the build.

Great cooling ability. Does the job well.

I owned a previous version of this that works for years. It had only two connections. I like the fact that you have several option for fitting and hose connections. The only down fall of this product it does not come with plugs. I had to buy them separately.

Replaced 2 360mm rads with 2 of these & the temps didn't change @ all

Although you will have to buy four plugs (average setup) the tube routing options are amazing. I have this along with a 360mm rad. It has about the same performance (a little more flow resistance) but is perfect for a rather thin rad.

These have six g1/4 threaded holes for input output, lots of possibilities but you'll need to blank the spares, which are not supplied.